Making a tent for winter fishing with your own hands. Homemade tent for winter fishing

Awnings according to their purpose are divided into:

intended for parking;
for swimming;
for transportation.

Parking

Protect the boat from external factors when laying up. The awning completely covers the boat, turning it into a vessel, which, for example, allows necessary repair work to be carried out under the roof.

the motor is tightly closed and protected from water ingress;
fastening is done with cords threaded into special rings of the awning design fittings;
The simple design ensures fast, reliable and durable installation.

Swim awnings

Nasal. Performs the function of protection against splashing water. Installed on the bow of the boat. Options:
- with viewing glass;
- without viewing glass.
- Characteristics:
- primary colors of green and gray;
- small volume and weight;
- easy installation;
- aerodynamic shape that helps maintain initial speed and stability.
Running gear. The awning reliably protects the fisherman from exposure to the sun, wind and water. Consists of front, side and rear structural elements. There are 2 types of awnings by design:
- with one-piece elements;
- with connected elements.
Transformer. This type is the best option for protection and convenience. The unique name was obtained due to the presence of six transformation positions, through which ventilation is ensured, as well as fishing on inclement days. Made in a tent style, with easy installation and use, taking into account the complete cover of the boat.
Frame. These awnings are also called “roof awnings”. Provide protection for the fisherman and his accessories from excessive exposure to the sun's rays and precipitation. Quite easy to install and use awning. The presence of high strength and long-term use are its characteristic distinguishing features.

Transportation

The function is to reliably protect the surface of the craft. As a rule, awnings should not allow moisture, dust and dirt to pass through. The “blanket” is equipped with fastening devices, through which it is firmly fixed to the boat.

How to make a cape tent

To attach the tent to the ice, it is best to use screws, which you can also make yourself. The simplest option is to weld pieces of metal rod to long screws.

You can put rubber or silicone tubes on both sides of the rod, in this case it will not cool your hands, and it will be more convenient to hold it. Such a screw can be easily screwed into the ice and then removed back.

You can also use construction screws to secure the tent. Their advantage is that they are hollow, so they are easier to screw into the ice.

At the end of each self-tapping screw, use a needle file to sharpen 3-4 sharp teeth. It is also advisable to drill a through hole that will go into the ring.

To make the screws screw in easily, you can use a piece of metal rod that will act as a handle.

DIY frame tent for winter fishing

A more complex option is making a frame tent. The frame can be made from metal or plastic pipes, connecting them using small tubes, corner and three-way hinges. With the right approach, you will get a reliable design that can be quickly assembled and disassembled. Thus, a do-it-yourself winter fishing tent can be made of any size and shape.

A frame tent can be placed on a sleigh. In this case, it will be easy to move on the ice. To make a sled, you need to use the same metal tubes and any suitable wooden or plastic skis.

The following frame materials are used:

aluminum tubes;
steel wires with spring properties;
fiberglass rods with spring properties.

The shape of the frames is either angular or arc-shaped. The characteristic properties of springing serve to firmly stretch the awning. Aluminum frames are structural, taking into account the insertion of one part into another.

What materials are used

The main material for making awnings is synthetic fabrics, nylon-based. For the manufacture of viewing parts - window, windshield - polyethylene or lavsan is used. However, long-term use affects the quality of the review. Therefore, it is better to use polyvinyl chloride-based film.

On a note! PVC fabric itself is not used in the manufacture of awnings due to its roughness, heaviness and complete lack of air passage.

Making a dome tent

You can make a more complex pattern and make a dome tent. A do-it-yourself ice fishing tent in the shape of a dome will require more time to manufacture. It is not as compact for transportation as a cape, but it will also be much more convenient to fish in it.

An ice drill is not suitable as a support for a canopy. You need to prepare a special spacer with a pointed end that will stick into the ice. To make the tent easy to transport, the spreader must be collapsible. Its individual sections can be connected using metal tubes - this type of fastening was used in old bamboo fishing rods.

There should be holes along the edges of the dome for attaching the tent to the ice using spacers. Another option is to sew on loops.

Bow awning

In manufacturing, for reasons of safety, convenience and “dryness,” moisture-resistant materials and appropriate components that optimize the quality of water resistance will be required.

First you need to decide on the exact dimensions of the boat and, if necessary, make the corresponding drawings. In addition, to determine the fastening of the frame, it is necessary to inspect the fastening fittings located on the sides of the boat.

On a note! The first manufacturing steps are carried out by making an approximate size pattern on a “test” fabric, after which the sketch is transferred to the base material. At the same time, we must not forget about the additional allowance of fabric to form a “sleeve” for passing the fastening.

DIY winter fishing tent - making a floor

It is not necessary to make a tent floor, but it will make fishing as comfortable as possible.

Isolon (polyethylene foam), one of the types of sheet insulation, is perfect for its manufacture.

It is better to take a variety of this material with the smallest bubbles - it is very dense and conducts heat minimally.

This flooring helps retain heat. When using it, the ice under the tent does not melt even when using powerful heating devices. In addition, all fishing accessories can be laid out on an isolon mat without having to be placed in the snow.

How to make a walking awning

The organizational stages of manufacturing this type are similar to the bow one: we determine the dimensions of the boat, the frame, and make a pattern for the awning using test material.

The following materials will be required:

a pipe for an arc measuring at least 20 mm (at least 4 m);
bracket (at least 9 pcs);
awning fabric (not less than 9 m);
nylon threads;
transparent film for window parts;
fasteners for fastening parts of the awning when folding them (at least 10 pcs);
buttons for fastening the awning.

To begin with, a frame is made: one pipe will be the carrier (large size), and the second will be mounted on the middle part of the carrier (small size).
Manufacturing occurs by bending aluminum pipes to obtain the desired shape, taking into account the dimensions of the boat and the expected ceiling height of the future awning.
Having prepared the desired shape of the arc and retreating at least 20 cm from the base of the tube, a device - a clamp, with holes for bolts - is placed in the middle of the supporting frame.
The small frame is equipped at the ends with a fastening device with a coupling to limit its rotation in one direction. With these fasteners, parts of the frame are fixed to each other with bolts. Here you need to take into account that the limiter in the fastener is located on the outside of the small frame, from the supporting one.
Having previously installed the frame on the desired part of the boat, marks are made to place the fastening spots.
The parts of the boat where the marks were made are cleaned and covered with glue. In the same way, the patches are covered and glued.
The upper edges of the frames must be equipped with clamps-rails, into which rubber shock-absorber belts will be attached, equipped with hooks that will be attached to the front and rear parts of the boat cylinder in fastening fittings.
After installing and fixing the frames in a vertical position, as a rule, the entire structure of the running awning will be placed on them. After manufacturing and installing the frame, you will need to cut out the elements of the awning. They consist of several parts, including transparent oilcloth parts for front and side viewing.
In manufacturing and cutting, the lower parts of the side and front elements must have a spare length of up to 20 cm, where they will be folded to the inside, thereby forming a passage for the rope. The folded part must be equipped with holes for eyelets with a distance of up to 15 cm.
The side, viewing and overlapping parts of the awning must be stitched with zippers from the inside in order to combine with other elements of the awning and the frame.
At the end parts of the awning, where the zippers are sewn, it is necessary to attach push-button attachments to tightly fix the parts of the awning and prevent the zippers from opening when exposed to wind.
After making and cutting the awning, the first step is to attach the ceiling part of the awning to the frame arches. The top of the awning is stitched with three zippers. One zipper is sewn on the inside, one on the edge of the awning and one on the outer middle part between the inner and outer zippers. Here you need to take into account how the zipper wraps around the upper arc of the frame.
The awning is pulled onto the frame by attaching the outer and inner zippers to each other, taking into account the coverage of the frame arc.
An external zipper is used to secure the viewing and side parts together.

How to sew a tent awning

An awning for an ice fishing tent can be sewn in one evening, and you don’t have to be a craftsman to do it.

Before sewing the tent, individual patterns must be fastened with pins, which are positioned perpendicular to the seam; the more of them, the better.

Transformer

The transformer is one of the most difficult to manufacture. Tubes and fasteners will be required in significant quantities. In addition, the use of special glue and a number of accessories such as hooks, eyelets, and rubber accessories is provided.

All samples and sketches of tent elements must take into account the volume of the product. The peculiarity of these awnings lies in their removable characteristics. If necessary, the entire structure can be assembled on the back of the boat, following the example of a convertible.

When making frame arches, they need to be equipped with hinges to connect them together. Also, the arcs should be attached to the side parts of the boat, taking into account the possibility of quick assembly with the awning fabric.
The production of arcs occurs by analogy with a running awning. Bends are made until the desired shape is obtained.
The front, small arc of the frame is attached to the middle of the supporting frame by means of a thrust hinge. This hinge is also a limiter in the rotation of the small frame outward from its position.
The sides of the frames must be equipped with clip-rails through which shock-absorbing belts will be pulled and attached to the side fittings of the boat. In this case, the frame will be firmly fixed in a vertical position.
After this, the cutting and cutting out of the awning elements on the basis of the installed frame begins.
By analogy with running awnings, the formation of transformers occurs by flashing the connecting parts between the elements of the awning with zippers.
The lower parts of the awnings should be sealed by folding the end of the awning in a double layer and stitching.
These parts are equipped with holes for grommets in which hooks will be placed in order to attach them to the side fittings of the boat cylinder.
After the top is located on the frame by closing the zipper, the visibility, side and rear parts of the awning are attached to it, also by means of zippers.
Having placed and attached all the parts of the awnings to each other, you need to pull them down using hooks and attach them to the side fittings of the boat cylinder.
Straps are sewn at the top to hold and secure certain elements of the awning. In fact, the difference between a transformer lies in the assembly of its elements in a separate order. If necessary, you can fold the side or front parts, securing them with a fixing belt.

Parking awning

By analogy, it is designed strictly in accordance with the dimensions of the boat. The following materials are used:

waterproof material;
masking or adhesive tape;
fastening buttons or eyelets;
scissors;
markers.

Awnings of this type are made taking into account the absence of frame arches. It is necessary to completely cover the boat with awning material;
After preliminary measuring the required part of the boat, it is necessary to cut out the awning, taking into account the separation of additional dimensions along the edges, for placing fasteners, stitching sleeves, for passing a rubber cord through them;
In the covering state on the awning, measurements are taken of such auxiliary inserts as pockets, zippers;
Next, they begin cutting on a machine;
The finished covering is stretched onto the boat;
The awning should tightly cover the entire surface of the boat, its lower parts are pulled down along the entire perimeter, and attached with sewn fastening hooks (depending on the side fittings of the boat) to the fittings of the boat.

Biminitop

Another variety is roof awnings. A distinctive feature of such awnings is the absence of side walls. The design of the awning is very simple.

Materials:

waterproof material;
transparencies;
metal arcs;
belts with buckles for shock absorption;
connecting carabiners.

First you will need to prepare support parts consisting of 4 aluminum tubes.
Counting more than 20 cm from the end, support hinges are installed on the two tubes. Similar hinges are also installed at the ends of the other two tubes.
By means of hinges, a pair of tubes is attached to tubes with hinges at part of the base. When positioned vertically, the finished structure should display the letter “U”.
Based on the width of the intended boat covering surface, metal arcs are formed taking into account their connection to the support tubes.
In order to achieve the integrity of the tubes, a rod consisting of a durable rubber material can be passed along the inside of the support tubes and the frame arc, which will be attached to the base parts of the opposite support parts.
Next, on the side parts of the boat you need to place 2 spots, with a hole for passing the bolt, and on the back and front of the boat there are 4 carabiners, into which the support tubes will be tied by tightening the shock-absorbing belts from the frame parts to the carabiners.
After the supports are installed on the spots, you need to stretch the awning material onto the upper part of the frame.
On a note! When pulling the bow poles towards the stern of the boat, the front part of the awning should be pulled more tightly so that it is at a lower level than the rear bow. Through this, the aerodynamics of the structure will not be compromised.
Having made the necessary measurements of the awning in cutting it out, you need to leave an extra 15-20 cm of material at the edges for making sealing layers.
Zippers are sewn into the compacted parts of the upper element of the awning from the front and back.
Sleeves through which nylon threads will be passed, which will be attached to the arches of the frame.
One pair of zippers is sewn from the inside of the awning, and the second pair is sewn on the extreme side of the awning.
After this, the finished awning is taken and placed on the arches of the frame, taking into account the folding of the ends of the awning onto its inner part towards the zippers sewn from the inside, fastened and fixed.

Thus, the awning is installed.

Awnings depend on the overall shape of the boats and their purpose. In the situation of using awnings for overnight stays, it is necessary to provide ventilation capabilities.
The dimensions of the boat and its features should be taken into account when the craft is inflated.
Tarpaulins are often used as awning materials. But, we must take into account the fact that tarpaulins become pliable over time when exposed to moisture. To prevent this, you need to treat the tarpaulin with a waterproof compound.

During winter fishing, the angler needs to protect himself from many weather conditions, which are acceptable in winter and are very suitable for this.

In addition, it increases the time the fisherman stays in cold weather. If you use heating devices in the tent, then the air in it can be heated to 20 degrees and you can freely stay in it without outer clothing.

Types of winter fishing tents

Winter tents are divided into types, which determine their design, installation and assembly.

Umbrella. This type is considered the simplest in its design. It has an umbrella design, making it easy to install and assemble. To make the frame, duralumin rods are used, which increase the reliability and strength of the tent. The awning can be made of synthetic fabrics or a combination with tarpaulin.
Machine. The scheme of their construction is that a tent is sewn to the frame. When assembling, it is enough to twist it into a circle, and it unfolds instantly due to the action of the frame, which works like a spring. Such tents are becoming increasingly popular among fishermen because they have a low price and light weight. But along with this, it has many disadvantages: poor resistance to wind, the frame easily breaks if the tent is not set up correctly.
Frame. Its design resembles the usual summer version. It folds out of several folding arches and an awning. She sorts it out in about 10 minutes, or even more. The tent is not particularly reliable. It is rare for fishermen to purchase this type of winter tent.

What requirements must a homemade tent for winter fishing meet?

Should create the most favorable conditions on cold, windy, winter days. In addition, it should serve as a place where you can cook a meal, drink hot tea and just warm up.

Nowadays the market is full of all possible types of tents, but it is still nice to make one yourself. If you are sewing a tent yourself, you must meet certain requirements:

It should be light and compact.
Since it is portable, the tent must be mobile.
Select fabrics that are dense.
It should be assembled and unpacked conveniently and quickly.
When making it, it is better to give preference to stronger and more reliable materials. The heat in the middle of the structure should be maintained for as long as possible.

What materials and tools will you need?

A very common, homemade one is a design based on. It can be bought at any store that specializes in selling fishing gear. In addition, you will also need some accessories:

Skis, two pairs (children's and school version)
Tubes, you can use ski poles.
An old folding bed.
Thick fabric, tarpaulin is best.

At first glance, it is not entirely clear what this design will look like. But, in practice, its effectiveness and ease of use have been proven. After completing the design, you should end up with a box that can be transported using skis. In addition, it is easy to assemble and move even on ice.

Drawings of a homemade winter tent

As you can see from the diagram, the tent is mounted on skis and this makes it easier to secure it on the ice. After all, mounting regular winter tents requires a lot of time and effort. And with such a design, the fisherman can move around the reservoir many times. Wherever a new hole is made, the angler drags it towards him and, having climbed inside, is ready for fishing in warmth and comfort.

Note! To reduce windage and make it easier to drag the tent in strong winds, you need to remove the awning from the tent. If you don’t do this, it will simply be difficult to drag it.

Step-by-step instruction

This design is very old, but very reliable. More than one generation of fishermen have tested it in practice.

How to make a tent with your own hands photo and pattern

Ski poles will serve as a frame, where they are installed vertically. Horizontal tubes should be an order of magnitude thinner. The upper nodes must be made in the form of a triple connecting adapter and its end is made like a cylinder. It is worth noting that the diameters of the cylinder and the tubes with which they are connected must match.
Next, the tubes are secured in a vertical position to the skis. A T-shaped tongue is inserted into a metal plate attached to the ski, which is located at the lower end of the tube. After this, the tube is rotated 90 degrees.
Two tubes taken from a folding bed serve to connect the frame to the box. The end of the connecting product is secured to the end of the bent tube. The latch is installed at the other end of the tube.
Eyelets made from copper strip will serve to connect the box with the tubes.
At the end of all the work, all that remains is to pull the awning. Metal plates with slots are installed in its lower part. You need to insert staples into these slots, which are driven into the side ends of the skis. The connections are secured with laces. In order for the structure to remain stable on a frozen body of water, it must be equipped with two anchors.

Homemade tent pegs and screws

In order to make pegs that will be used for a winter tent, you need to take long and strong screws. The peg has a hook-shaped top. This process is performed using pliers. Screws are made of metal tubes that have threads. If you don’t have one, then self-tapping screws will do just fine.

How to sew a tent with your own hands in the form of a house

You can consider another very popular type of tents, which are made in the form of a house. To make such a tent yourself you will need:

Fabric that does not get wet - 14 sq. m.
Metal washers – diameter 1.5 mm (up to 20 pcs.)
Braided rope – 15 meters.
Not a wide tape - 9 meters.
Rubberized fabric for bedding - 6 meters.

Having prepared all the materials, you can proceed to making a tent that can accommodate one or two people. To begin, cut out 2 pieces of fabric of the same size - 1.8 by 0.9 meters. A marking of 65 centimeters is made along the long side, and the same operation is performed on the other side. The fabric is cut at the connection points. This creates the entrance and back wall of the tent.

Tent for winter fishing can buy. They are different: large, small, medium; quite cheap and quite expensive. In any case, you can choose according to your budget and needs, buy it and not bother - that’s my opinion. But, there are people with obvious “creative incontinence” and too even hands, growing from exactly that place. Here, this article is for them - how to make your own tent for winter fishing.

So, why is it needed? For protection from wind and snowfall. Let's consider several options for making your own tent for fishing in winter. As usual, there is a simple way and a more complex, thorough one, and also a very thorough and very labor-intensive one. I will briefly describe all three.

. Well, this is the most conventional and easiest to make shelter from the snow and, to some extent, from the wind.

It's not even a tent, but rather a cape. Our task is to make a dome from thick polyethylene film. The support of the tent will be an ice screw. To do this, extend the drill to the maximum and screw it into the ice at an angle, as can be seen from the figure. Polyethylene can be cut in the form of an isosceles right triangle, so that when folded in half, you naturally get a rectangular isosceles triangle. If you forgot geometry or didn’t understand anything, here is the diagram.

Accordingly, we sew on a zipper that can be used to close it. We make holes in the grommets along the perimeter of the bell. Through these holes we will attach the cape to the ice using steel pins or nails.

A tent dome made of polyethylene is not the best solution in terms of strength. It is quite difficult to sew a zipper well without tearing the film. But, on the other hand, the film is transparent and everything around is visible. So, you can make a dome from fabric (light, translucent or denser). You can make a dome using a more advanced pattern. This is already a transition to a more complex winter tent design. Here, an ice screw won’t work as a support. At a minimum, you need a central support, higher. It can be made foldable by holding the sections together with tubes, like the old bamboo fishing rods. One end is sharp to pierce the ice. We pull the canopy onto such a central support and tighten the edges by driving pins into the ice through the holes (or using guy ropes sewn to the tent canopy).

Even more complex structures, as in the figure, require more than one support. In addition to the central one, 4 or more auxiliary supports are required on the sides. This way you can make a fairly large tent. Of course, the larger the tent, the more folding poles, the heavier and bulkier the tent will be when folded...

And, the most outdated, time-consuming and complex option make a tent for winter fishing– make a collapsible rigid frame from aluminum tubes. And a dome made of thin fabric is pulled over the assembled frame. There are many design options! I think if you have reached the point in life where you want to make this kind of tent yourself, then you will design it, construct it yourself to make it even more interesting

I repeat. Personally, I think that with the current abundance of winter tents on sale, and their moderate cost, doing it yourself is a dubious idea. But perhaps there are fans of various homemade products and they will decide make a tent for winter fishing with your own hands. I hope these brave people will find some useful ideas in the proposed material.

A comfortable and spacious tent is one of the most important attributes for winter fishing. You simply cannot do without it. Often, fishermen have to spend hours in severe frost and wind waiting for a bite. It’s good if there is a tent nearby in which you can periodically warm up. But what about those who cannot purchase it? After all, this pleasure is not cheap. Today we will tell you how to do this. This process does not require any special skills or knowledge.

Types of winter fishing tents

First, you must decide on a suitable design. We list the main types of tents:

Umbrella. For the manufacture of the frame, duralumin rods or tubes are used. The finished structure has rigidity and increased strength. Any synthetic fabric is suitable as an awning. They are often used in combination with tarpaulins.
Automatic tent. This option is not as common as the previous one. A distinctive feature of the design is that the tent is sewn to an elastic frame and then folded into a circle.
Frame on arches. This model consists of 2-3 arcs made of fiberglass or duralumin. The structure quickly unfolds in place. An awning is pulled over it.

What shape can a tent for winter fishing have? Cube, triangle, trapezoid and so on. The choice is yours.

What requirements must a homemade tent for winter fishing meet?

First things first. The main function of a tent is to protect a person from adverse weather conditions (wet snow, strong wind). It also increases the comfort of fishing. While under the tent, you can prepare food and tea, as well as warm up using special heating devices. Of course, there are a variety of winter fishing tents on sale. The photos attached to this article prove to us that homemade designs turn out no worse than store-bought ones.

So, let's get down to business. What should you pay special attention to when sewing such an important attribute? for fishing, made with your own hands, must meet the following requirements:

1. Have a lightweight, compact and mobile design. This is understandable. Some fishermen would prefer to freeze for a few hours rather than carry an extra load.

2. Quick to unfold and easy to install.

3. It is advisable that a do-it-yourself winter fishing tent be made of thick tarpaulin or waterproof fabric.

4. A truly durable frame is made from aluminum and composite materials. But it is not recommended to use plastic.

5. The inside of the tent should remain warm. It would be nice to achieve this without heating devices (portable, gas and others). But this is a utopia...

What materials and tools will you need?

A DIY winter fishing tent is an excellent solution that will allow you to save a lot of money. We propose to assemble a fairly simple design. We are talking about a tent based on a standard box, which can be purchased at a fishing store. We will also need:

one pair each of children's (very small) and school skis (up to 160 cm long);
several duralumin tubes (you can remove them from ski poles);
old cot;
(will be used as an awning).

DIY winter fishing tent: instructions

All necessary materials and tools are prepared. Now you can move on to the practical part:

1. Take duralumin. From these we will make vertical tubes of the frame. As for the horizontal tubes, they should be a little thinner. The upper connections of the ribs of the future tent are made in the form of tees that end in cylinders (length 5 cm). It is very important that the diameter of the cylinders is the same as that of the tubes being connected.

2. We begin to secure the lower ends of the vertical tubes to the skis. The main role here is played by the shaped lock. At the lower end of the tube we find a T-shaped tongue, and then carefully insert it into the metal plate attached to the ski. All that remains is to rotate the tube 90 degrees.

3. To connect the tent frame with the box, we use 2 duralumin tubes from an old folding bed bent at the ends. The end of the connecting product must be secured to the end of the bent tube. At its other end we install a latch, which, during docking, with its tongue will fall exactly into the hole on the second bent tube.

4. The box will be connected to the above mentioned tubes using round lugs located on the ski racks. They can be made from copper or steel strip and then attached to the posts.

5. Now you need to pull the awning. We install metal plates with slots on the lower edge of the material. It is through these slots that the U-shaped brackets driven into the side ends of the skis will pass. We fix the connections using shoe laces. In order for the tent to hold well on ice, you need to equip it with anchors (2 pieces). Each such anchor has two blades at the ends.

Assembling the tent on site

Making a winter tent is only half the battle. It must be assembled and installed correctly. The algorithm of actions is as follows:

1. We connect the halves of the bent tubes with the skis. The tongues should fit into the slots of the plates. The tubes are located along the axis of the skis and then rotated 90 degrees.

2. We thread the ends of each pair of tubes through the eyes on the ski racks.

3. Connect all 4 skis. The locking tab of the bent tubes should snap into place.

4. Let's start installing the box.

5. We install 4 vertical posts at the ends of the skis.

6. Now you need to install tees on the ends of the tubes, and then connect them to the roof tubes.

7. Align the holes of the tubes and tees. The installation wires will pass through them.

8. We stretch the awning onto the frame. We thread carabiners and plates through the brackets and tongues on the skis. We fix the connections with laces.

9. At the end of the process, we attach anchors and install them in pre-prepared holes.

Conclusion

Now you know how to make a tent with your own hands, what materials and tools are required for this. By following the recommendations and instructions described above, you can create a stable and reliable structure.

SHOW

COLLAPSE

Many anglers who are interested in winter fishing are interested in the question of how to make a good tent with their own hands. In this article we will talk about why this accessory is needed, consider possible designs and alternative options.

Purpose

The main purpose of the tent is to protect the fisherman from the adverse effects of the environment. In our case it is snow, wind and cold.

Thick snow clogs the hole, makes it difficult to register a bite and covers everything around. And if you add wind and cold to this, then fishing turns from pleasure into torture. Another function is protection from onlookers. As strange as it may sound, if you fish in a body of water with great fishing pressure, then the presence of such a protective tent will be very important even in mild weather. In addition to annoying interlocutors, you will also get rid of unwanted neighbors. During the absence of a bite, many fishermen actively monitor the reservoir for the presence of fish from their colleagues. During such periods, small fishing towns may gather around more successful anglers. A tent can not only protect you from the elements, but also from other anglers if that's what you want.

Constructions

There are many design options. Which one is better to use depends on how often you change your fishing location. If you intend to sit in one place all the time, then camping tents with tension lines are quite suitable for you. For running fishing, you need structures that are quickly assembled and light in weight.

Stationary

To make such a shelter with your own hands, you need to install a frame and pull an awning over it. As a frame, you can use a collapsible structure of various layouts. The awning is fixed both on the posts themselves and with pegs driven into the ice. You can sew it with your own hands from a tarpaulin or other dense material that is not blown or wet. The awning needs to be made a little larger than required. The lower edge of the awning should lie on the ice (about 15-25 centimeters). This area is covered with snow, which prevents the tent from blowing from below. This shelter is used primarily for night fishing, which involves fishing in one place.

Easy to install

Tents of this type are an awning into which spring steel rods are sewn. These rods hold the tent open. The arrangement of the rods can provide a hemispherical, cubic or triangular shape. The latter is the easiest to make, but it has the smallest internal volume, which can cause inconvenience when fishing.

It is better to sew an awning with your own hands from nylon or nylon. Tarpaulin is no longer suitable here, since it has a lot of weight. This tent is quick to set up and easy to transport.

Based on a sled

A sled is an indispensable item for winter fishing. They can also be used as a tent base. On the sled, you can mount a rectangular frame made of aluminum or plastic pipes, on which the awning will be placed. For convenience, the frame can be made collapsible. This shelter can be transported assembled.

A more complex option is a fan-type folding design. This mechanism is also used in strollers for a lowered canopy. In this case, the awning is attached to a set of U-shaped pipes. A folding frame based on a sled is an excellent option for fishermen who actively move around a pond in search of prey. Installing such a tent with your own hands will take no more than 20 seconds.

Panel house

If you are a car owner and love comfort when fishing, you can make your own shelter from sheets of plywood or chipboard. But it will be more like a fishing house. You will need 6 sheets of pre-cut holes for the windows, doors and holes. You can make sandwich panels, which consist of two sheets of plywood and an insulator. Such panels have good thermal insulation properties, and their use in your house will provide comfort to its inhabitants.

Alternatives

Oilcloth

If you don’t have a tent, then you can use the most ordinary oilcloth. In this case, the fisherman himself serves as the frame. It should be said that this this option is not suitable for those who like very active hooking, because with such movements the oilcloth will fly off. As a stand, you can use an ice ax or an ice pick stuck into the ice. The lower edge of the oilcloth must be folded inward and secured with available items.

You can also sew a large bag from oilcloth with your own hands, which is put on the fisherman.

Such a shelter greatly restricts the angler’s movements and is not suitable for fishing with a balance beam.

The advantages include minimal cost and very fast installation. This is an excellent option for winter fishing enthusiasts who do not sit still and do not want to spend money on purchasing or making a more expensive shelter.

Tourist

If you have a camping tent, it can also be used for winter fishing. It would be very good if it had a bottom. To use such a shelter for winter fishing, it is necessary to modernize it - make a U-shaped cutout at the bottom, through which access to the holes will open. We also recommend sewing a zipper there. Tourist tents are less expensive than specialized fishing tents, and they can also be used for outdoor recreation.

If you plan to fish at night, then feel free to install a stationary shelter, but before that, inspect the ice for the presence of gullies, which may reach your site by morning. For lovers of fishing with a balance beam, a fan-type design, made with your own hands on the basis of a sled, is perfect. If you don’t want to spend extra money, an oilcloth bag is just for you.