How to properly tie a hook to a fishing rod. How to properly tie a hook to a fishing line. Knots for connecting fishing lines

For centuries, float fishing has been considered a particularly interesting and exciting activity, bringing a lot of pleasure and unforgettable sensations. Traditional, one might say, classic fishing methods will always be popular and relevant, so fishing with a regular fishing rod is actively promoted in our days.

However, any experienced fisherman knows that the success of this fishing method directly depends on correctly assembled gear. Only if a person takes the installation of his fishing rod with special responsibility will the upcoming fishing be truly catchy and exciting.

An integral attribute of any float tackle is a hook. A lot depends on the quality of this element, including the number of bites and the expected catch. But besides this, the installation of the hook and leash is of great importance for the effectiveness of any fishing.

In order to reduce the likelihood of the hook falling off, it must be tied firmly and securely. For this, experienced floaters use appropriate fishing knots.

So, first, it’s worth understanding the concept of a “fishing” knot.”

The fishing knot is unique type of knot, which is used by fishermen when installing hooks. Having experience in knitting, you can always be confident in the performance of your gear, which is an important factor in the success of any fishing.

The following types are considered the most popular fishing knots:

"Palomar";
"Bloody;
"Eight";
“Locked up bloody;
“stepped;
"bayonet;

And many others…

Today we will talk in detail about some of the above fishing structures, find out installation features and learn how to knit them quickly.

"Palomar"

This fishing knot has been very popular for many years. Experienced fishermen consider it the simplest, but at that time reliable and high-quality. Many people think that it is ideal when using braided line as a leader, but in reality this is far from the case. Rough thread surface does not allow the angler to tighten the knot as tightly as possible, which can ultimately lead to its unraveling.

Most often it is used for tying lures, and in the case of hooks its usefulness is much reduced. The fact is that for this knot the fisherman needs to pull the line through the ring on the hook six times, and in the case with monofilament line Due to this, the reliability and strength of the fishing line is greatly reduced. Still, if you are interested in how to knit this fishing knot for lure fishing, be sure to read the instructions.

How to knit a Palomar fishing knot

First, you need to fold the fishing line in half and pass the resulting loop through the ring on the metal bait.
Then you need to make two more similar passes through the hook.
The remaining end of the braid can be tied with a regular fishing knot.
You need to pass the bait with a hook through the resulting loop;
At the end, the loop needs to be thrown over the braid between the hook ring and tied again with a strong regular knot.

The remaining line can be trimmed.

"Bloody"

The “Bloody” fishing knot is not as popular as the previous version, but it is still famous for its particular ease of installation and good functionality in operation. Based on the “bloody” one, there are many other types of knots with improved structure and shape. The knot is great for both tying spinners and hooks, but it can be knitted only for monofilament line. Braid is not suitable for this knot at all.

Knitting "Bloody"

A small piece of fishing line must be inserted through the ring of the hook, then the remaining end must be wound around the main monofilament fishing line from 3 to 7 times - it all depends on the diameter of the selected fishing line. If it is thin, then there should be as many revolutions as possible, and vice versa.
The end of the fishing line must be passed through the loop, which was formed by winding the fishing line around the hook.

That's all! Then the knot must be tightened firmly, and the tip of the fishing line must be cut, but not too short, to avoid arbitrary untying.

Node indeed very simple, but its quality matches this. It is best used when catching small fish with small hooks.

Fishing modification "Locked Bloody"

“Locked Bloody” is a modification of the famous “bloody” and it is knitted as simply as its main relative.

To install it, you need to take the hook in your right hand and pull the fishing line through it. Then you need to wrap it well around itself and thread it through the eye of the hook again.

You need to insert the tip of the fishing line into the loop formed in the third step, and then you need to pull it well so that the entire structure is firmly fixed.

The famous fishing knot "Eight"

Perhaps this option is considered the simplest and most understandable. It can be created as follows.

Squeeze the line in half and pull the resulting loop through the head of the hook. Wrap the remaining end around the main line 1-3 centimeters from the hook, and then pass it through the tip again and tighten it well.

"Snood"

This fishing knot is great for tying hooks with a characteristic shoulder blade at the tip. “Snood” is suitable for both braided thread and traditional monofilament, which is used as a leader. It can be used with medium thickness line as well as very thin line. When tying, you should adhere to the main rule - if the fishing line is thick, then there should be fewer turns.

The limiting element of this unit is the number of windings that the fishing line can make. The main thing is that there should not be less than five of them, since in this case the strength of the fishing line will greatly decrease.

It is worth noting that this node is excellent for simultaneous tying several hooks, in case the angler fishes two or more baits with one tackle.

The fact is that its structure is built in a very interesting way: the tail of the fishing line goes down and can be used without losing the strength and reliability of the entire unit.

The process of tying the Snood is a little more complicated than it was with the previous version. Let us remind you that this knot is suitable for leashes and hooks with a “spade”.

The Snood fishing knot has many modifications that are based on it, but are intended for narrower purposes.

Fishing knot "Stupid hook"

The knot has been known to fishermen for a very long time, but its popularity has not decreased at all in our time. The name "stupid" says nothing about this node. He's enough thoughtful and reliable, so avid floaters very often tie their hooks with them.

As a change from the previous “Snood”, this option can only be used for hooks with an eye, under which, in turn, it will be necessary to tuck the tail of the fishing line. The similarities between the two knots are only that they can be used for both thin and medium fishing line.

Minimum number of windings starts at 7.

To tie this fishing knot, you need to take the hook in your left hand, pull the line through the eye a few millimeters forward, and then turn it back, while tightly fixing the formed loop.

With the same left hand, you need to make 12-7 turns of the fishing line around the hook.

Then the line needs to be inserted through the body of the hook and the formed loop near the head.

Pull the long line tightly and check the quality of your work.

That's all, from now on you can easily tie some of the most popular and reliable fishing knots, which will help secure your hook or leash efficiently. Now you can be sure that your tackle will withstand any load and cope with any bite.

When fishing, the amount of catch depends entirely on how correctly and efficiently the hook is tied to the fishing rod. Even if the fishing line is in water for a long time, under significant load, a knot tied according to all the rules, will help prevent troubles in the form of fish falling off the hook.

Universal knot

An extremely popular method of tying a hook is the universal knot.

The main advantage of this knot is that it can be used for any hook. When this knot is tied correctly, the likelihood of accidental untying is virtually eliminated.

To tie a universal knot, follow these steps:

if there is an ear, the end of the thread needs to be threaded into it. When using a hook without a ring, the thread should be placed parallel to the shank;
looseness is formed a loop;
another part of the thread it is required to wrap around the forearm with thread 5-7 times;
thread the tail of the thread into the loop and carefully tighten it into a tight knot, wetting the fishing line.

Notes:

arrange the turns as closely as possible to each other, without intersecting;
When the turns are formed, the main line must be in a tense state and not twisted;
It is advisable to tighten both threads as evenly as possible;
when the knot is located on the fore-end, it must be pulled up to the eye/scapula.

After the knot is tied, you should check its reliability. To do this, you need to pull with a little force; if the knot breaks, it was tied incorrectly.

Other nodes

Although universal knot quite popular, other nodes are also used for fishing.

Fishing hub "Palomar"

The Palomar fishing knot is quite popular among fishermen, especially spinning fishermen. It is easy to tie and yet is extremely reliable. A hook with a ring, a swivel, and a jig head are used for it.

When using “braid” as the main fishing line, the knot will give an almost 100% guarantee of strength if all the conditions for correct tying are met.

The Palomar knot is tied like this:

the thread is folded in half, the loop is threaded through the eye of the bait. If the ring size is insufficient, the thread is threaded through the eye, and then, having formed a loop, it is threaded in the opposite direction;
this is a ring with the rest of the thread tied with a simple knot so that the hook is inside the knot. However, it should not be tightened too much;
a loop throws itself on a hook;
the node is wetted and tightens until it closes tightly on the ring (be sure to pull the two ends of the thread);
extra end of braid need to be cut off, leaving about 3 mm.

There is one drawback to such a knot - the consumption of the fishing line is quite noticeable after a couple of dozen tyings. To save thread, at the initial stage, when a regular knot is tied, you should pull out the loop so that the free part of the fishing line is 2-3 mm.

After this, the loop is thrown over the bait in the same way and tightened, the length of the free end will not change.

Fishing knot "Palomar triple"

When using a hook for large fish, the “Triple Palomar” knot is perfect.

To tie it you need to do the following:

fold the thread in half and thread the resulting loop through the eye of the hook;
then a piece of fishing line is threaded through the eye of the spoon a couple more times;
an ordinary knot is made a little higher than the bait;
a spinner is threaded into the loop;
the loop is placed on the braid between the eye of the spinner with turns of the braid and a simple knot;
The fisherman's knot is tightened, and the remaining thread is cut off.

The advantages of such a knot include its high reliability, and it can be tied using either fishing line or rope.

How to catch more fish?

I have been active fishing for quite some time and have found many ways to improve the bite. And here are the most effective:

. Attracts fish in cold and warm water with the help of pheromones included in the composition and stimulates its appetite. It’s a pity that Rosprirodnadzor wants to impose a ban on its sale.
More sensitive gear. Reviews and instructions for other types of gear can be found on the pages of my website.
Lures using pheromones.

You can get the rest of the secrets of successful fishing for free by reading my other materials on the site.

Fishing knot "Bloody"

The Bloody Knot, also called the Snake Knot, helps tie together a pair of fishing lines that are approximately the same in diameter. It is quite simple to knit and will not be difficult to learn. Braids, ropes or nylon fishing lines will work for the knot.

A knot is tied by performing a number of actions:

The line should be placed parallel, one thread makes turns around the other several times (for a braid, three times is enough, for a monofilament with a diameter of 0.3 mm, four times, a thread of 0.15-0.3 mm - five times, less than 0.15 mm - six times);
return the tail of the thread back and skip until the beginning of the revolutions between the braids;
with the next line the same steps should be repeated;
end of next thread we pass into the loop that arose between the first and second turns in the direction opposite to the tail of the first thread;
tighten the knots, evenly dragging long tails;
remove excess ends.

Important: we use this knot for threads of different thicknesses, taking into account that there should be fewer turns on a thicker thread than on a thin one.

Fishing knot "Locked Bloody"

The “locked bloody” knot will appeal to fishermen who use fishing line with a safety margin. With its help, a hook is attached to a thread with a diameter of up to 0.6 mm. It is also popular when mounting a sinker or spinner.

We tie the “locked bloody”:

we will pass one part of the thread through the ring of the hook;
taking into account the diameter of the thread, we wrap the main fishing line from 3 to 7 times, based on the thickness of the thread;
draw the tail of the thread into a loop next to the ring;
we pass the fishing line into a large loop and firmly fasten the knot.

Now only mine bites!

I caught this pike using a bite activator. No more fishing without a catch and no more looking for excuses for your bad luck! It's time to change everything!!! The best bite activator of 2018! Made in Italy...

Fishing knot "Bloody Tucked"

The “Bloody Tucked” fishing knot is used only with monofilament of small thickness (up to 0.2 mm). This knot has been modified to other “bloody” ones in that its “tail” is bent behind the thread, creating an increased friction force, preventing loss.

The knot is tied like this:

one tail of the thread is threaded into the ring of the hook;
the main line is wrapped around the tail 5 times;
the same tail of the thread is passed into the ring formed next to the eye of the hook;
the tail is threaded into this loop from bottom to top;
Carefully secure the knot using the smaller end of the thread, remove the rest.

Fishing knot "Clinch of the Bloody Knot"

The fishing knot "Clinch of Bloody Knot" is available for thin monofilament, and the hook ring should allow you to pass the thread twice. The tail of the thread is tightened with a double loop, falling into a “clinch”, hence the name of the knot.

Create a node:

draw the tail of the thread into the eye of the hook 2 times;
we wrap the main thread three to seven times;
draw the tail of the thread into the double loop formed at the hook ring;
We form a knot: you need to take the tails of the thread in your hands and separate them at different ends.

Remove the remaining fishing line. A jig or a hook with a wide ring is tied with this knot.

Fishing knot "Snood"

To tie a hook with a shovel, it is convenient to use a Fisherman's knot « Snood». When tying it, you can use either monofilament or braided line. Its advantage is the fact that it makes it easy to attach many hooks one after another.

To create a node you need to do the following:

when using a ring hook insert a thread into it. If you use a hook with a spatula, you need to create a circle from the fishing line so that the first tail of the thread is inside it;
take the edge of the loop and a hook for the eye/spatula. With the other hand, make turns, wrapping the bait, based on the diameter of the thread - from 5 to 12.
take the hook by the fore-end, form a fisherman's knot by pulling out the fishing line protruding from the side of the eye.

This type of knot was invented at a time when fishermen could not even dream of hooks with eyes.

Fishing knot “Sliding Snood”

If you want to attach another hook to the main thread without using a leash, use the “Sliding Snood” knot. With its help, an additional hook moves along the thread without reducing its reliability.

This knot is remarkable in that it is tied using an additional thread, and the main one is only picked up by a knot. The big advantage of this knot is the ability to attach a hook to a thread of an existing diameter.

The “Sliding Snood” knot should be tied as follows:

pick up a hook and with the participation of another thread, make a loop so that one of its tails is outside the loop (wrap the fishing line around itself, forming a loop);
using a loop wrap around yourself 8 times clockwise;
above(at the location of the loop) place the main fishing line on the hook;
make another 5 turns of the loop, grabbing the main line;
right hand take the hook by the base, and with your left hand pull it by the second fishing line, securing the knot.

This knot has no effect on the state of the thread.

Fishing knot "Stupid Leash"

The ring hook is easily attached using the Silly Leash Knot. It is designed for tying using thin fishing line.

The knot is tied like this:

thread the fishing line into the ring of the hook and turn it in the opposite direction;
take with one hand wrap the resulting loop with your other hand around the forend at least 7 times. A prerequisite is the perfect fit of the turns to each other;
between the thread, inserted into the ring, and hook the tail of the fishing line;
secure the knot, pulling up the base of the thread.

This knot leaves up to 90% of the thread strength.

Fishing knot "Marshall Trap"

Very easy knot to tie "Marshall's Trap" will help maintain up to 80% thread reliability. The thickness of the fishing line should be at least 0.2mm; braided line is also suitable.

How to tie a knot:

fold the tail of the fishing line 20cm long in half;
Attach the end of the fishing line to the main thread using a regular knot. Do not tighten the knot tightly;
from the inside we send a loop into the ring of the knot;
we put the hook into the loop, the tail of the thread is passed there;
we form a knot by moistening the fishing line in advance, pulling up a smaller part of the thread;
We move the knot to the hook ring by pulling the main thread.

This knot is ideal if necessary, without wasting time and firmly tying the bait.

Fishing hub "World Fair"

To tie a hook or jig to a thread of any type and thickness, an interesting knot is suitable "World's Fair" Its breaking reliability is up to 70%. The knot is used for tying on any type of fishing line.

Tie a knot:

fold the fishing line in half and insert it into the ring of the hook;
in the opposite direction, the loop is thrown so that the half rings capture the folded thread;
the tail of the thread is threaded through two fishing lines;
send the end of the fishing line into the loop that was formed by the single fishing line at the point earlier;
To form a knot, pull the main and tail threads at once.

This fishing hub is quite small.

Fishing knot "Leash"

You can tie a hook with a spatula or a ring using the “Leash” knot. It is highly reliable, retaining up to 95% of the thread strength. This knot is used both on monofilament and on braid.

The node is formed as follows:

If there is an eyelet, thread a thread through it. Having brought the line to the bend of the bait, turn it towards the eye to form a loop;
through the loop from the point above, wrap the end of the thread around the hook (5-10 turns, based on the diameter of the fishing line);
tighten the knot by pulling the thread to the sides by both tails. Trim the unnecessary ends of the thread.

Fishing knot "Pence"

One of the knots that can be used to easily attach a hook is the Pence fishing knot. It is available for tying fine and medium line. The knot's tensile strength is up to 70%.

You can tie a knot in the following way:

we send the fishing line into the eye of the hook;
roll the tail of the thread into an arc, bringing it closer to the main part of the fishing line;
we place the main fishing line on the index finger of the hand, grab the thread with it, which forms an arc;
Pull slightly towards yourself to form a loop;
With the produced loop we make two turns around the main fishing line;
we insert the tail of the thread into the loop from the point above;
We pull both ends of the fishing line in turn, tightening the knot.

Fishing knot “Dukan Loop”

For thin monofilament fishing lines, the Duncan Loop fishing knot is suitable. This knot is often used in an overlap to attach small flies. The strength of the knot for monofilaments reaches 90%; this knot works better with soft monofilas than with hard ones.

Tie a knot:

we send the fishing line into the hook ring;
we make an ordinary loop by turning the line in the opposite direction;
insert the end of the thread into the formed loop;
make 5-6 turns inside the loop;
moisten the thread and tighten the resulting knot.

This knot is quite compact and does not require much time to tie.

Fishing knot "Grinner"

The Grinner knot is quite strong. It is used only for tying a hook to monofilament of various thicknesses, leaving up to 80% of the strength of the fishing line.

We tie it as follows:

we send the fishing line into the eye of the hook, then we take it back, then we turn it back towards the hook;
through the formed loop we wrap the main fishing line with a free tail 3-5 times;
we tie a knot on the main thread, dragging a short fishing line;
We form a knot at the hook by pulling the main fishing line.

Using this knot you can attach a hook, sinker or jig.

Fishing knot "Pitzen"

A fairly effective method for tying a hook, jig or sinker to a monofilament line is the “Pitzen” knot. It is available for tying on threads of different thicknesses. The knot is quite strong - up to 90% strength, despite the ease of tying.

Knot tying process:

we send the tail of the fishing line through the eye, then pull it in the opposite direction;
supporting with your finger, make four turns towards the hook;
pass the tail into the last loop from the eye of the hook;
We form a knot by pulling the free tail of the thread. Excess line must be trimmed.

Fishing knot "Turle"

The “Turle” knot will help you tie a hook to a thin or medium monofilament without wasting time, but it is not suitable for braid. Its reliability is up to 80%. The hook ring should be large enough so that the thread can be threaded twice.

How to tie:

we pass the fishing line through the eye of the hook, turn it in its direction and make a loop around the thread;
we tighten the loop, pass the fishing line through the created ring and throw the ring over the hook;
tighten the knot and trim off the excess fishing line.

The node is ready.

Fishing knot "Thumb knot"

The fishing knot “Thumb Knot” is considered quite effective for tying a hook or spoon to a thick monofilament line.

The strength of such a unit is up to 75%; its peculiarity is that it is quite simple tie on a stiff thread:

we pass the fishing line into the eye of the hook/spoon and take it back;
We take 2 tails of the thread in one hand, wind 3 turns around the thumb with the smaller end, and then pass the end of the thread back through the turns;
remove the turns from the finger onto the thread one at a time;
pull the main line, forming a knot.

Important: when tightening such a knot, be sure to make sure that the turns lie side by side and that each one is tightened.

Fishing knot “Nail with loop”

To make a small knot on a thick thread, use the Nail and Loop knot. Mono fishing line is also used. You can use it to attach a hook or sinker. The knot strength reaches 75%.

It goes like this:

we pass the thread into the eye hook/sinker, form a loop over the eye;
next stitch we form it from the hook side so that the hook is inside it. On the opposite side of the hook, press the junction of the lines forming loops with your thumb to the palm of your hand;
fishing line that forms a large loop, make 4 turns around the small loop, constantly leaving the hook inside the large loop;
tighten the knot, pulling out the tail of the fishing line, and then the main thread.

Fishing knot "Cat's paw"

Without many loops, a Cat's Paw knot is tied. Attaching this knot will create a hook with an eye to the existing thread. Its strength reaches 85%.

Tie a knot:

bend the line in half and pull it through the eye of the hook;
we put the loop on the hook, moving it towards the main thread;
wrap the hook around the loop approximately five times clockwise;
We form a knot by first moistening the thread, tightening both of its tails.

Important: when tightening, the coils must fit snugly against each other. The knot comes out quite original.

Fishing hub "Lindemann"

To secure a hook or spinner on a thin and medium thread, you can use the Lindemann knot. The knot has great strength, up to 95%.

We tie a knot like this:

we send the fishing line into the ring of the hook/spoon;
make a large loop towards the main line, after which we re-pass the thread into the eye of the hook;
with the end we wrap the main line and the thread adjacent to it, forming a loop, 3-5 times, pushing each turn through the loop;
tighten the knot by pulling the short end of the fishing line.

Fishing knot "Rebecca"

The Rebeca knot is considered quite reliable, although it is very easy to perform. Easy to tie with this knot hook with eye for monofilament or braid. Knot strength up to 70%.

we pass the thread through the eye of the hook;
make 4-5 turns around the forend;
re-send the tail of the thread into the hook ring, but in the other direction;
We fix the knot by pulling the turns of the knot from the hook onto the thread, after wetting it.

Important: after pulling the loops off the hook, both ends of the thread should be together.

Fishing node "Centaurus"

One of the most popular among Australian fishermen is the Centaurus knot. The knot can be used on fishing line of any thickness, and due to minimal friction, the strength of this knot is up to 90%.

The knot is tied as follows:

we pass the thread through the hook ring, form a loop around the main thread, holding it with our fingers;
repeat the point 2 more times, holding all 3 loops in your hand;
we pass the thread through 3 loops, without tightening, we form a knot;
tighten the loop on the main thread, after this action the hook should hang on the loop;
We move the finished knot to the hook ring.

Due to its versatility, this knot can be used to attach any bait to anything.

How to tie two hooks on a fishing rod?

For more productive fishing and a larger catch, 2 hooks are often attached to the thread at once.

Tie 2 hooks to 1 leash. This is done quite easily, and the reliability is high. The second hook is tied in the same way as the first - we insert the thread into the ring of the hook, make several turns, wrapping the shank, and send the line into the eye in the opposite direction.
Make a loop on the main thread with three turns, for maximum reliability. When tightening the loop, thread the leash with the next hook into it and tie with a suitable knot.

These are the most convenient and fastest ways to tie a second hook to a thread without any difficulty.

Useful facts about fishing knots

What will help you tie a reliable knot and preserve the quality of your hooks longer:

when rust appears on the bait you need to stick them into ordinary soap, after some time the rust will disappear; To prevent rust, add starch to the container in which the hooks are located.
before inserting hooks into the rod, you should put a rubber ring on it, this will help the hooks not to become dull;
before tightening the knot, the thread must be moistened. As it dries, it will become more rigid, which will add reliability to the knot;
the most convenient hook– thin and as sharp as possible, with an eyelet it is more convenient than with a spatula;
smaller hooks more convenient for fishing;
into the new season you should change the fishing line, this will help avoid accidental breaks; After fishing, it is necessary to dry the fishing line;
in the cold you can lubricate the thread with technical petroleum jelly to prevent it from freezing;
wet rods cannot be left in the sun - they will crack and warp.

How long has it been since you had a really BIG CATCH?

When was the last time you caught dozens of HUGE pike/carp/bream?

We always want to get results from fishing - to catch not three perch, but ten kilogram pikes - what a catch! Each of us dreams of this, but not everyone can do it.

A good catch can be achieved (and we know this) thanks to good bait.

It can be prepared at home or bought in fishing stores. But stores are expensive, and to prepare bait at home, you need to spend a lot of time, and, to be fair, homemade bait does not always work well.

You know that disappointment when you buy bait or prepare it at home and only catch three or four bass?

So maybe it’s time to use a truly working product, the effectiveness of which has been proven both scientifically and in practice on the rivers and ponds of Russia?

It gives the same result that we cannot achieve on our own, especially since it is cheap, which distinguishes it from other means and there is no need to spend time on production - you order it, it’s delivered and you’re good to go!

Of course, it is better to try once than to hear a thousand times. Moreover, now is the season! This is a great bonus when ordering!

Find out more about the bait!

Many novice fishermen face the problem of not knowing how to securely tie a hook. On this page we will look at two of the most common and very popular hook knots. One of them is used only for hooks with a through eye, for the other - universal, the shape of the eye does not matter, it holds the hook well with any fastening. Both nodes are classified as spiral, as they are formed by a spiral of fishing line wound around its fore-end (leg).

There are many weaves that are used to tie a hook to a fishing line, but spiral ones are considered the most durable, compact and less noticeable. They are used by almost every angler who knows them. Spiral fishing knots have one great advantage; among others, tied in a spiral around the fore-end, they eliminate line overlaps - the points at which it usually breaks under load, thereby minimizing the loss of line strength in the area where the knot is formed.

The strength of the fishing line on such fishing knots or the strength of the knot is up to 97% of the nominal breaking load, therefore, its losses do not exceed 3%, which meets the requirements and is an excellent indicator for both amateur and sports gear.

It’s not enough to know how to tie a hook to a fishing line; you need to be able to do it in practice and there’s no point in memorizing a lot of patterns if fishing trips are casual; without constant practice they are quickly forgotten and skills are lost. In this case, it is more advisable to master several universal knots, and in order not to get confused at first, you can have a sketched cheat sheet or a photo on your phone with you when fishing.

Any fishing knot must be moistened with water or saliva before tightening. For greater reliability and confidence that it will not fail at the most crucial moment, it won’t hurt to drop a drop of super glue on it.

We tie the hook to the fishing line.

The following ultrasound is one of those that a beginning angler must have in his small arsenal. Its main purpose attaching hooks to leashes and the main fishing thread, which is why the name most often used for it is: “Leading spiral knot.” But since both plexuses discussed on this page are similar and have the same purpose, with the difference that in the first case the spiral is tied inside the loop, and in the second - outside, it is easier to remember the knots as drive spiral internal And drive spiral external. Internal and external spiral ultrasound can be performed easily and quickly, and most importantly reliably, tie a hook.

Let's look at a step-by-step diagram of the process of knitting an internal spiral ultrasound. We take the KR in our right hand and place its sting (edge) at the top, as shown in Figure No. 1.

As an example, we use a product with a through eye bent towards the tip. If the ear is bent in the opposite direction, place the accessory with the tip down, and form the weave from the back side. This moment is important because it determines the position of the hook in a suspended state. A correctly tied hook has no kinks or distortions at the junction with the monofilament; it passes in a straight line into the fore-end, which looks like its continuation. Otherwise, the iron will puff up unnaturally, losing grip and giving itself away.

We insert the end of the core into the ear ring and push 12-15cm into it. We will tie a knot with this piece. Threading the fishing thread into the eye and passing the end of the required length into it, we bring both hands together so that you can free your right hand by intercepting the hook with the thumb and forefinger of your left hand, by the shank near the eye, while at the same time holding the line with them so that it didn't slip out of the hole.

With your free right hand we form a loop over the forend, as shown in Figure No. 1, inside which we tightly wind the turns of the spiral (Fig. 2, Fig. 3), holding each subsequent turn with the fingers of the left hand (thumb and index).

In the figures, for clarity, the spiral is intentionally wound loosely. In fact it is necessary to wind as tightly as possible, without allowing the turns to overlap and float on each other.

Having wound 6-7 turns, we put the fishing line into a loop in the same way as we did when winding a spiral (Fig. 3) and pull it up, holding the entire plexus with the thumb, index and middle fingers of the left hand.

We take the hook into the other hand and pull up the opposite side of the fishing line, securing the knot. Then we wet it and tighten it with force on both sides alternately, repeating the previous operations.

Any forceful manipulations with the hook and near it must be done carefully, being careful of its sting, remembering that it goes in easily, but is sometimes removed with the help of a surgeon. It is more convenient and safer to pull the line when tightening the knot with small pliers with pointed noses; they can also hold the hook.

We bite off the excess part of the monofilament with nail clippers or cut it with scissors, but be sure to leave the tip 3 - 4 mm long. This length ensures that it will not slip out of the grip under load and the knot will not come undone.

A drop of super glue will add reliability to it.

External spiral knot.

This type of hook knot is often called: "Trombone Loop" or "Spindle". It is considered universal because it is used both for hooks with a hollow and with a flat eye (spatula). Similar to the previous one, but has a significant difference; the fishing line is not pushed into the hole of the eye, but is placed over the shank of the hook and the spiral is wound not inside, but over the loop of the fishing line folded in half. It is knitted by analogy with the previous knot, with the same recommendations.

Over the many years of its existence, it has established itself as an everyday strong and reliable knot that does not require special knitting skills. Unfortunately, its author, like many others, is unknown and not noted anywhere.

We measure 15 cm from the end of the fishing line and fold it in half at this point. We place it above the shank of the hook, and for this, when choosing a side, we take into account the direction of the bend of the eye. In the figures below, it is curved outward, but if, on the contrary, it is curved inward, as in the previous case, or if the fore-end with the eye is straight, the hook should be turned over with the point down, and the loop should be placed on the back side.

We wind over the loop, grabbing the shank of the hook, 6-7 turns. We thread the working end of the fishing line into the loop, as shown by the red arrows in the figure. All operations are carried out in the same order and, similar to the previous node, the thumb and index fingers of both hands actively participate in them.

We tighten the knot alternately on both sides in two stages - without force and with force.

Trim off the excess thread, leaving a 3mm spine.

That's it, a solid and even spiral that firmly holds the forend of the product is ready.

For products with flat eye especially for “swallowers” - this unit is simply irreplaceable.

Of course, in trophy fishing, where a fish is considered to weigh more than 7 kg, such CRs are practically not used, and monofilament on leashes is used from 0.22 mm. In such cases, it is more advisable to use hooks with a hollow eye and, before forming the described knot, insert the fishing line into it or use the previous scheme.

I hope my article helped answer the question: "How to tie a hook to a fishing line?"and not just tie, but do it quickly and reliably.

Leave questions, criticism, feedback and suggestions in the comments in the form below. The most active participants, according to the results of the analysis at the end of 2016, will be rewarded with a fishing gift. All the best. Until next time.

Catching a fish is a real success, satisfying the hunter's instinct, increasing self-confidence. To achieve this, you need to have certain skills and not rack your brains over how to properly tie the hook to the fishing line. The outcome of the whole matter depends on this.

There are as many ways to tie knots as there are fishermen.

Much depends on how to tie the hook or what kind of hook it is (with a ring, leader, spatula, etc.). The most popular are:

"Palomar";
Triple "Palomar";
"Bloody";
"Locked Bloody";
“Snood”, aka “Leash”;
"Stupid Snood";
"Marshall's Trap"
"World's Fair"
"Grinner";
"Centaurus".

A video explains how to tie hooks best. But the use of verbal description will also come to the aid of all knot lovers. This will all help later (or during the process) to attach the spoon.

"Palomar" is the most famous knot. Explosive strength can reach 80%. Suitable for small-diameter fishing lines. It is better to choose monofilament.

The double end of the thread is inserted into the ring. It is not tightened, but a knot is tied for the hook. The loop is thrown over the object that needs to be attached. Wet the knot and pull both ends. The knot is tightened. 2-3 mm remains from the end, and the rest is cut off.

“Palomar” triple may not please owners of a hook with a small eye. But it’s perfect for fixing jigs and feeders. It will look great with multi-layer fishing line. Its strength exceeds that of its sister city: 85%.

In order not to think for a long time about how to tie a hook with such an intricacy, you need to pass the double tail of the fishing line through the bait ring three times. Next, the loose nylon thread is wound around the main thread and inserted into the loop. And then you can calmly tighten the knot - the fish certainly won’t jump off.

Bloody Knot

"Bloody". The knot borrowed this name from the rope knot, with which guilty sailors rubbed their hands until they bled. All this about the monofilament version, 70% durable.

The line is pulled through the hook ring. The tail is wrapped around the main thread 3 to 7 times. Then it is inserted into the loop closest to the ring. A knot is tightened behind the small tail, the end is slightly shortened with scissors - that’s all.

"Locked Bloody" node. It fits well in tandem with monofilament of small cross-section - up to 0.6 mm. In addition, you can even attach a metal leash. 80% strength is an excellent indicator.

First, the line passes through the hook eye. The tail is wound around the main one up to 7 times. Then it goes into the loop that is closest to the ear. Then it is pushed through the third turn of the loop. You can tighten it, but the tail needs to be trimmed. It is this final threading that creates a kind of closure. Visual examples (video) can help you understand these knitting methods, although their weaving is very simple.

Snood

"Snood" will show you how to tie a hook that has a spatula. The main thing is not to do less than 5 turns. Strength is measured at 90 – 95%. Ideally holds both monofilament and braided fishing line. Option for attaching several hooks in turn.

The fishing line forms a loop around the hook. The edge of the loop and the eye or blade of the hook device are taken, and then wound around it. 5 – 12 times will be enough. The forend is taken and the nylon thread that comes out from the eye is tightened. Here's the whole diagram.

"Silly Snood" is a little different in the way it attaches the hook to the nylon thread. It helps to attach a hook with a ring to any fishing line. The strength is quite good - 85 - 90%.

The knot for it is tied like this: a fishing line passes through the eye. Then it turns in the other direction, forming a loop. 7 - 12 turns are wound towards the eye. Then the line is inserted into the body of the hook. The length should be pulled and you will get a knot. You will need to move it to the eye of the hook and trim off the excess tail. As you can see, this method turned out to be not stupid at all.

Marshall Trap

The Marshall Trap is universal. The cross-section of the fishing line should not be less than 0.2 mm. The end of the fishing line and its main part are tied with a regular knot, forming a loop. It slips into the hook eye. Fits on the fore-end. The end of the line is skipped. By extending the smaller tail, a regular knot is tied. Then the longer end is pulled, the knot moves to the hook. You can trim the tail. The node is ready.

world fair

"World's Fair" This is another way to tie hooks to monofilament thread. He ties a jig.

The fishing line is folded in half and inserted into the eye. A loop is placed in the other direction so that the half rings capture the folded nylon thread. The tail is pushed through two fishing lines. The end of the thread is inserted into the loop of the previous step. Next, both ends of the fishing line are pulled. You need to be careful and understand how to tie a hook to a fishing line using this example.

Grinner

"Grinner." It can be used to attach a jig or hook to a single-layer fishing line. You need to do from 3 to 5.

The fishing line is inserted into the ring of the hook. Then it is pulled back, where the tying of the knot continues. The line moves to the side and forms a loop. The main monofilament is wrapped, and the tail of the loop passes through the already formed ones 3 to 5 times. The small end is tightened. The node is ready.

Centaurus

"Centaurus". They can freely attach a sinker, spoon, jig to all types of fishing lines.

The fishing line is inserted into the ring of the hook. Its tail is twisted along the main one 3 – 5 times. Then it is pulled to the hook of the ring and pulled through the turns along the main line away from the ring. The knot is tightened, and the excess tail can be cut off.

There are so many possibilities for tying a hook that it is impossible to fit them all into one article. The main (and most popular) methods of tying knots are outlined above. Also need to be reminded about the general rules for working with fishing lines:

The fishing line must be durable and inconspicuous in the water.
When preparing the connection with the hook, it is advisable to wet it.
Choose the right type of node.
Once again, familiarize yourself with how the video or diagram suggests knitting fishing line.
Believe that big fish will definitely be caught.

So, there are a lot of possibilities for tying a fishing line to a hook. Sometimes they have several names(like “Snood” and “Leash”), sometimes their names sound intimidating, but the method of tying is simple. You just have to take into account what kind of fish the fisherman is going for; the choice of fishing line (monofilament or braided thread), and therefore the type of knot, depends on this. If you don't succeed in mastering the skill the first time, you need to try again. Fishing in principle depends on the strength of the knot.

It would seem that every fisherman knows how to tie a hook to a fishing line, but still this topic is important and the Internet is replete with requests on this topic. This is explained by the fact that many beginners come to fishing, other fishermen are switching to mastering braided cords, where they use their own specific knots, and some simply want to broaden their horizons.

One way or another, we decided to touch on this topic and talk about the most popular types of knots for knitting fish hooks. Let's build today's story simply: we'll divide the entire text into parts, each of which will be devoted to only one method. Let us warn you right away that the nodes are named as in English terminology, you may know them under completely different names.

Bloody

Despite the ominous name, this hook knot is one of the simplest and most common among anglers. It is used in those connections where special strength is not required, since the strength of the fishing line on it is reduced to 70 percent.

Bloody is used only for monofilament fishing line; it is not used for tying braided line.

Several other related knots are based on this simple knitting method, so studying this method will provide an opportunity to understand the technique of more complex designs. In addition to the hook, they can also use a spoon, a sinker, and a swivel, and it is so named because in this way a knot was made at the end of the rope, which was used to punish English sailors for their offenses.

The technique for tying a blood knot is as follows:

We thread the tip of the fishing line into the ring.
We wrap it around the base three to seven times.
We thread it through the loop at the ear.
Tighten by the short end.

Bloody locked

This modification of the previous node increases its strength to 80 percent. It is named so because the tip is pressed with a fishing line, clamping it into a kind of lock. It must be said that this unit is also very versatile, and it can be used on thick monofilaments up to a diameter of 0.6 millimeters.

Here's how to properly tie a hook with this knot:

We repeat the first three steps, as in simple Bloody.
After threading the tip of the monofilament thread into the loop near the eyelet, we insert it from top to bottom into the newly formed loop and after that tighten it.

Bloody tucked

The difference from the previous bloody brother of this modification is that in the last action the tip of the fishing line is passed from the bottom up from the hook, as if tucking a loop. This makes it possible to use it on monofilament lines up to 0.2 millimeters.

Clinch

Another variant of the Bloody Knot. It is used for fishing with thin and medium monofilament. Here's how to bind it correctly:

We pass the tip of the line through the eye of the hook twice.
The rest of the actions are the same as in simple Bloody.

Palomar

Many fishermen consider this particular tying scheme to be the best. In fact, having completed Palomar once, your hands will forever remember the technique of knitting it. The strength of the knot reaches 80 percent, and it is used exclusively on simple nylon fishing lines of small and medium thickness.

Palomar is knitted like this:

The fishing line is folded in half and inserted into the eye of the hook.
We wrap the resulting loop around the main cord.
We put a loop on the hook.
Holding the hook with one hand, with the other we tighten both the main line and its end at the same time.
Trim off the excess.

There is a triple Palomar, but it is used to tie braided line to spoons or other lures.

Due to the triple passage into the ring, it is not used for hooks.

Snood

This very popular fishing knot is truly versatile. It can be used to tie either a hook with an eye or with a spatula, and it is used on both monofilament and braided threads. Its strength reaches 95 percent.

Many fishermen use snood; some do not even know its name, which is translated from English as “hair net.” It fits like this:

You need to take the hook with the curve up in your left hand.
Form a loop from the fishing line and attach it to the fore-end so that the tip points towards the sting. Moreover, if the hook has a bent ring, you can first thread the tip into it.
Holding the edge of the loop near the ring or spatula with one hand, wrap the forearm with turns with the other hand until the bend begins, then throw the loop over the hook.
Tighten the knot at the long end of the fishing line, holding the hook.

Sliding Snood

This knot is knitted in the same way as a regular Snood with the difference that it is used for tying not to the end of the fishing line, but in an arbitrary place. It can be tied to both braid and monofilament; it does not reduce their strength, since additional fishing line is used to attach it.

You can securely tie a hook to a cord without a leash in the following order:

We repeat the first two points from the previous description, only we do everything on an additional piece of cord.
We make half the number of revolutions around the forend.
We apply working fishing line to the fore-end.
We make the second half of the revolutions.
We tighten the additional fishing line and cut off its tails.

Leash

This knot is quite strong and versatile for tying hooks with an eye or spatula with thin braids and monofilaments; the strength of the Leash reaches 95 percent.

The order of tying it is as follows:

We make a loop from the vein.
Holding it at the eye of the hook, we begin to wrap the tip of the shank inside the loop.
You need to make 10-15 turns depending on the thickness of the cord.
Finally, you need to tighten both ends and cut off the tail.

Stupid leash

Most fishermen use this knot without even knowing that it has that name. It is used on braided and monofilament lines up to 0.3 millimeters thick.

It is similar to a simple Leash, only the winding is carried out not inside the loop, but outside. At the end, you need to slip the tip of the cord between the forend and the winding and tighten it.

Loopy

This popular and reliable way to attach a hook is a little similar to the previous knots, but a little weaker in strength.

Used for models with a spatula or a ring, it knits quite quickly:

Fold the end of the fishing line in half, for a hook with a ring, first thread the tip into it.
Place the loop along the hook with the loop facing the hook.
Holding the loop at the hook with the fingers of your left hand, we wrap the free ends around the forearm with your right hand at least six times.
Finally, we insert the end into the loop.
After wetting the knot, tighten it by the main cord.

It is worth paying attention to the nuances that must be taken into account when tying this knot:

when tying a model without an eye, the main cord should be in tension for convenience, so the reel with fishing line can be pressed down with something heavy;
in such knots the number of turns plays a role; the more, the stronger.

The simplest of knots

At the very end, we invite you to familiarize yourself with the technique of knitting the simplest of knots for hooks with a spatula. It is quite strong and reliable and can be used for both monofilament and braided fishing line.

The limitations when using such a mount are as follows:

not suitable for lines over 0.20 millimeters, however, where such thick leads are needed;
a hook with a miniature spatula can slip under strong tension.

Knitting technique:

At the end of the cord we form a loop with a double overlap, like a surgical one.
Fold the resulting loop into a figure eight.
We thread the forend through both halves of the figure eight.
We wet the vein and tighten the knot, cutting off the tail.