Fishing for bream: how to catch, what to bite on, bait, bait and tackle for bream. Catching bream in July on a feeder How to catch bream in July on the Volga

Share the article on social networks

Fishing in July has a lot of features, two of which should be known to anglers planning to fish for bream in July. Firstly, July is the hottest month of summer, so the fish, in search of colder places and, accordingly, with a better oxygen regime, bream takes a liking to secluded places and is reluctant to react to baits and lures. Secondly, weakly flowing water bodies bloom in July. From this we conclude that catching bream in July is more successful in the first half of this month, but from the second half, catching bream will require certain efforts and knowledge from the angler.

Where to look for bream in July

Choosing places where bream fishing in July will be effective is an important task. Remember that in search of cool places, bream tries to stay in deep holes, and only leaves them for a short time while feeding. Fishing for bream in July means, first of all, choosing the right place:

• On large rivers, it is better to catch bream in deep places with a small current, a hard sandy or sandy-pebble bottom. The easiest way to detect such places is by changing the direction of the river bed, by changing the coastal topography.
• On small rivers, bream fishing in July is successful in relatively deep holes, pools among aquatic vegetation, reeds, and cattails.
• In shaded areas of the reservoir, fishing for bream in July can be successful at relatively shallow depths, near aquatic vegetation.

To catch bream in July, you can choose a place that is not overgrown with reeds and other vegetation, but there is plenty of it. It is advisable to find a place where the depth will be approximately 3-5 m. There is a higher chance of catching bream in holes and riffles, where there is a relatively small current, since it sometimes floats to the surface of the water. Keep in mind that the fish loves areas of water shaded by the crowns of trees, where the bottom is muddy and uneven.

The best time to catch bream is early in the morning; bream is worse caught in the evening, although there are exceptions. There is also an opinion that it is best to catch bream in July in sunny weather, since it does not like cloudy weather. Some fishermen believe that the easiest time to catch bream is at dawn or just after sunset.

Fishing gear

Fishing for bream in July involves the use of certain gear. The best gear for catching bream this month is:

• a long float rod with a thin rig.

The large length of the rod is due to the fact that in July you have to catch bream at quite great depths and often at a great distance from the shore. For catching the largest specimens of bream and, accordingly, more careful ones, a feeder rod with a small feeder is suitable.

Many anglers take several sets of rods at once when fishing for bream in July. For example, to catch bream in July, you can go fishing with a float rod, a fishing rod with bottom tackle, or a spinning rod with certain types of wobblers and jigs (the choice of gear depends on your preferences, but still a float rod will be better than a spinning rod). It is advisable to take a strong reel and long fishing line with you.

Bait for bream

The attachments and baits for catching bream in July are the most classic and understandable to any angler. A number of bream specialists recommend using the following baits and attachments for catching bream in July:

• dung worm, bloodworms, maggots, pasta, semolina.

It is worth noting that many anglers believe that in the summer, catching bream using semolina is most effective. This simple semolina and water attachment never fails.

Catching bream in July without bait is like an airplane without wings. Bream loves bait very much. Fishing for bream in July will be more effective if fishermen add flavorings to the main important component when preparing bait for bream. It is better to choose green peas as the main component for bream bait; you can add pearl barley or other porridge. Also, bait for bream in July should have a strong aroma of confectionery and a sweetish taste. Bream also reacts well to bait with spicy aromas. When millet porridge is added to the bait, bream will never pass by it.

Bream fishing begins to be most active in June. When fishing, a certain skill is required, because even with frequent bites, this fish can fall off the hook due to its soft lips.

Specifics of catching bream

The bream feeds by standing on its head. Prefers worms, bloodworms, dung worms, broom larva or maggots. Among plant baits, it readily takes egg dough, steamed peas, and semolina porridge.

Bream does not like to search for food, but due to the need for large quantities of food, it goes to places with constant food. In reservoirs, it periodically changes its parking places, but does not change its feeding places.

Such places are made at a depth of up to 3 m. This fish is not suitable in shallow water. In deep, muddy places, the bite begins later. It is also necessary to take into account the calorie content of the bait, because the more nutritious it is, the faster the bream will satisfy its hunger.

Where to look for bream in summer?

The water level drops in summer. Bream can no longer be found near the shore during the day. It feeds near its permanent residence.

Fish can be found in calm water, near the bottom in deep pools, in shallows far from the shore with sharp transitions into holes and bays with clay or silty soil, in whirlpools, near steep banks, near thickets of water lilies or on the border of reeds and reeds.

When searching for a fishing spot, examine the coastal vegetation and riverbed. It is also useful to take a walk in the evening and in the morning to notice the “play” of the fish (a splash of water, and before that the appearance of the head, dorsal fin, and, finally, its tail), the appearance of bubbles at the feeding site of the bream.

The influence of weather on bream biting

The bream grabs the bait consistently in stable weather. The bite increases with gloomy skies and calm weather, sometimes even after rain. The bite intensifies even more in bad weather and thunderstorms.

With eastern and northern winds, the bite worsens. Also, the bite is weak with stable southwestern and southern winds. When the weather gets colder, the bite becomes weaker or stops completely.

Best time to catch bream

Bream takes bait most actively during the feeding season, which begins in July. At any time of the day, bream overeats, but does not forget to be careful.

How to catch more fish?

I have been active fishing for quite some time and have found many ways to improve the bite. And here are the most effective:

1. . Attracts fish in cold and warm water with the help of pheromones included in the composition and stimulates its appetite. It’s a pity that Rosprirodnadzor wants to impose a ban on its sale.
2. More sensitive gear. Reviews and instructions for other types of gear can be found on the pages of my website.
3. Lures using pheromones.

You can get the rest of the secrets of successful fishing for free by reading my other materials on the site.

How to catch bream in June during the day?

During the day, bream is found in holes and all sorts of depressions, where it looks for food.

How to catch bream in June in the evening?

In the evening, this fish is no longer afraid to approach shallow slopes, and when it starts to get dark, it already goes out onto reaches overgrown with vegetation.

Now only mine bites!

I caught this pike using a bite activator. No more fishing without a catch and no more looking for excuses for your bad luck! It's time to change everything!!! The best bite activator of 2018! Made in Italy...

How to catch bream in June at night?

Surprisingly, it is mainly large bream that bite at night. If we compare the bite with the daytime bite, the fish take it more often.

At night, the fish goes to the light from the fire, to the cattle watering place, to steep banks, to beaches, piers, shallows and fords, in general, to places with easy food.

During the full moon, the zhor intensifies. There is an opinion among fishermen that on a new moon, bream often runs aground.

By morning you can cast 10–15 m from the shore. They fish in absolute silence.

To prevent the bait from making splashes, it is sent into the water in a crumbly state.

More flavors are added to the bait. To prevent the bait from being washed out, clay is added to it.

Lures and groundbaits for catching bream

The bait is made from shell meat, boiled potatoes, steamed peas and wheat, thick semolina porridge, worms, and molted crayfish.

Groundbait is made from bloodworms, maggots, vanillin, anise, spices, steamed bran, black bread, various cereals (for example, hominy, rolled oatmeal, oatmeal).

The bait and groundbait are different and not repeated every day. Various flavorings and sugar or honey are added for sweetness.

You will have to experiment with the color of the complementary food, because bream in different bodies of water reacts to different colors and tones. It is mainly light brown, white and yellow.

How to choose the right bait for bream?

Firstly, it is necessary to remember that bream does not swallow the bait, but sucks it in. Heavily made up hooks simply will not be able to hook a fish.

The bait is chosen according to the preferences of the bream, but it eats various mollusks, crustaceans, larvae, plant shoots and algae.

This means you can use worms, crayfish meat, chafers, dragonflies and their larvae, butterflies, grasshoppers, crickets, mole crickets, frogs and tadpoles, steamed peas, oats, wheat, the crust of a loaf or white bread,

Secondly, when the mayfly (broom, panicle) flies out, this is the second half of June, it is better to use this butterfly. The fish eats itself off, as they say, from its belly, and the bream’s bite stops altogether for several days after that.

How to catch bream in June?

Bream bites on any fishing rod, spinning rod and donka.

Float rod

This type of fishing rod is used for fishing in quiet, important places. The fishing rod is chosen to be elastic and flexible. The main line is 0.18 mm in diameter, and the leash is 0.14–0.16 mm. Buy a friction reel.

Several sinkers are installed to distribute the load evenly. The fishing depth should not exceed 4 m.

The bait should lie on the bottom, but the sinker was a little short of the bottom. Bakery products with the addition of anise or dill are used as an attachment.

Breadcrumbs are added to the bait, but it is better not to use black bread.

On hook No. 5, lumps of dough should be sculpted in the shape of a pear, and maggots and worms should be planted in clusters. A sign of a bite will be the lowering of a vertically standing float on its side.

This indicates that the bream stood on its head and sucked in the bait along with the water. After some time, the float will sink, which means you need to make a sharp and short hook, otherwise you can tear the bream’s lips and it will fall off.

This fish does not offer resistance until then, and if you give the bream a breath of air, the fish will give up completely.

Wire fishing rod

A light fishing rod is taken with a length of 2.2–2.8 m. The fishing line is chosen to be thin, but the strongest. The float is chosen bright. The sinker consists of three pellets. the first and lightest are placed at a distance of 3 cm from the hook, the next two at a distance of 30 cm from each other and the first.

A “ball” of caddisfly, burdock, maggot, and insect larvae is hooked onto the hook. Biting a bream is similar to another fish swallowing bait. The float suddenly goes under water. At this moment they make a hook.

Bottom fishing rod

In June, it is better to catch bream using a bottom fishing rod. This is due to the fact that it goes deep. Steamed peas, a ball of dung worms or 2-3 maggots are used as bait.

If the donka is used from a boat, then the bait is delivered to the very bottom in a special mesh feeder with a large sinker. If from the shore, then cast in small portions directly to the place where the bottom fishing rod is installed.

The hook is made long and at the slightest vibration of the nod. Fish is caught in such a way as to prevent the line tension from weakening. The fishing line is taken with a diameter of 0.2–0.35 mm. The stronger the current, the thinner the fishing line.

The bottom is equipped with a spring with its own loading. Leashes are made 5–10 cm long from fishing line with a diameter of 0.1–0.2 mm. Attach the leash directly next to the spring.

Which baits are best for catching bream during the day, and which ones at night?

Red dung worms can be fished day or night. At night, they additionally use worming, weeding, and squeegee.

During the day they supplement the bait with dung worms. There should be a large number of them so that they can drown out the smell of the hook. They are pricked in two places (in the middle and near the head).

Fishing for bream at great depths and in various currents

At great depths, a wire rod will be of little use. Bream don't like fast moving bait. It is better to use a ring and an undercut.

The bait will be bread crumb, peas, a cube of porridge, several maggots or worms. There is no rush to hook. The skill of hooking in strong currents and at depth will come with experience.

There are several rules:

1. A well-fed bream will not really grab even small bait.
2. The fish grabs a small bait immediately, but a large one first absorbs it.
3. At night, bream is less careful than during the day.

How to catch bream in June from a boat?

It is best to cast a ring from a boat in a strong current. A landing net is also used to pull out fish. Bream always shows active resistance when approaching the surface. The bait is thrown to a depth of 2–3 m and not near the boat itself, but at a distance of 10 m.

conclusions

To catch bream, you first need to find a place for its permanent anchorage, which is no deeper than 3 m. Large bream take at night near the shore, but during the day it is better to fish from a boat near sharp changes in the bottom.

Hook the fish carefully so that it doesn’t fall off. When fishing, use a landing net, since the bream actively resists when approaching the surface.

How long has it been since you had a really BIG CATCH?

When was the last time you caught dozens of HUGE pike/carp/bream?

We always want to get results from fishing - to catch not three perch, but ten kilogram pikes - what a catch! Each of us dreams of this, but not everyone can do it.

A good catch can be achieved (and we know this) thanks to good bait.

It can be prepared at home or bought in fishing stores. But stores are expensive, and to prepare bait at home, you need to spend a lot of time, and, to be fair, homemade bait does not always work well.

You know that disappointment when you buy bait or prepare it at home and only catch three or four bass?

So maybe it’s time to use a truly working product, the effectiveness of which has been proven both scientifically and in practice on the rivers and ponds of Russia?

It gives the same result that we cannot achieve on our own, especially since it is cheap, which distinguishes it from other means and there is no need to spend time on production - you order it, it’s delivered and you’re good to go!

Of course, it is better to try once than to hear a thousand times. Moreover, now is the season! This is a great bonus when ordering!

Find out more about the bait!

Spring has ended, and at the same time serious changes have occurred in the underwater kingdom in general and in the life of bream in particular. Firstly, procreation activities and everything connected with it have ended: spawning, illness after it, return to the place of permanent stops. Secondly, the water level has become optimal, as they say, the river has “become low water” and now flows along its usual channel.

All this means that catching bream on a feeder in the summer will not only be a good vacation, but can also bring a good catch of hefty fish. It is this kind of fishing that we will talk about in today’s review: we will tell you how, where and what to catch one of the most beautiful and desirable fish in Russia, using the English donka - feeder.

Where to look for bream in summer?

At the beginning of summer, having rested from spawning, bream return to their permanent camp sites. There are distinct habitats on the river - channel edges in deep-water irrigation areas, along which its migration takes place. Separately, we can distinguish longitudinal holes, on the boundaries of which, especially at the exit, schools of bream are also concentrated.

In the evening, the fish tend to rise closer to the shore, occupying sites near the shore edge. Experienced bream fishermen know about such daily migration. When planning to stay for night fishing, they feed fishing spots close to the shore in advance.

On a wide river, it is preferable to fish from a steep bank, as it is easier to get to the coveted edge.

Bream bite best in the first month of summer - June; as the water warms, its activity decreases and resumes again in August. These terms are valid for the regions of Central Russia; make the appropriate adjustments for your area.

Keep in mind that similar species of carp fish travel through the reservoir together with bream. So don’t be surprised when you have sop, silver bream, and blue bream in your bycatch. The “king” of the river, the ruffe, is also a frequent guest on the bream table.

Selection of gear elements

Over the centuries, the donka has undergone many changes, and the result of numerous modifications is the modern feeder tackle. It consists of the following elements:

• special rods;
• spinning reel;
• main line;
• shock leader;
• feeder installation;
• feeder;
• leashes with hooks.

Now, as they say, let's go through the list in more detail.

Rod

Fishing for bream in July on a feeder can take place in various bodies of water, depending on this, or rather on the speed of the water flow in them in the first place, and the choice of rod depends. In standing-type reservoirs: large ponds, lakes and reservoirs, light feeders are used, in which the weight only affects the casting distance, therefore the rods are chosen to be light or medium in test. The optimal solution here would be to use a feeder rod 3.30-3.60 meters long with a dough of up to 60 grams.

Fishing on the river in summer presents completely different conditions. Here, the weight of the feeder used is primarily influenced by the strength of the water flow and, as a consequence, its ability to hold the equipment at one selected point. Therefore, during a current, you need a form that can deliver a heavier load, sometimes reaching up to 150 grams, to the required distance. A feeder with the appropriate test can do this, and the length of the “stick” will already be 13-14 feet.

Note! An English foot is equal to approximately 30 centimeters!

We conclude: it is optimal to catch bream and bream on the river with a heavy feeder with a test of 90 - 150 grams, the difference depending on the strength of the flow, and a length of 3.90 - 4.20 meters.

There are feeder fans who prefer to fish from a boat. This is often prompted by the fact that the edges are so far away that they simply cannot be reached from the shore. When installing a floating device in a current, the pressure on the line of the water flow decreases, accordingly, lighter tackle can be used. Picker, a light feeder, 2.70 - 3.00 meters long with a dough of 40-60 grams in such conditions will be the best choice.

For feeder fishing, spinning reels with a rear drag are mainly used. They balance English rods better and are easier to control when fishing for a large trophy. However, front-friction “meat grinders” also have their fans.

The front clutch in combination with the baitrunner will help bring out a particularly weighty trophy.

As for the size of the reels, the selection is carried out depending on the power of the rod: from 3000-4000 units according to the modern Shimano-Daiwa classification for a medium feeder and up to 5000-6000 for a heavy one.

Line and shock leader

Many copies have been broken in the debate among feeder operators over which fishing line is better to choose: monofilament or braided line. The first of them stretches well, absorbing the jerks of strong fish, the second allows you to fish at a longer distance from the shore and has increased sensitivity. However, the cord also has its disadvantages. It does not dampen the jerks of the fish at all and is very abraded by underwater obstacles: pebbles, shell rocks, snags.

Most feeders therefore switch to using thin braid in combination with a monofilament shock leader. For example, for a 90 gram feeder, it is optimal to use a braid 0.14 millimeters thick with a leader of 0.25 millimeters.

The use of a shock leader provides the following advantages:

• ability to cast heavier feeders;
• resist abrasion from underwater obstacles;
• cushion the tackle when fishing;
• use when knitting installation.

It is best to tie the shock leader to the main line using a carrot knot.

Feeder installations

Feeder equipment for bream can be any of those used in this type of fishing. Which one to use often depends on the angler’s preferences, but you still need to adhere to the following rules:
1. The anti-twist tube greatly coarsens the tackle, so it is used mainly by beginners in feeder fishing.

2. An asymmetrical loop is ideal for flow; some difficulties in tying it at first are more than compensated for by sensitivity.

When biting, the force in the asymmetrical mounting is transferred directly to the quivertip.

3. A symmetrical loop, on the contrary, works better in stagnant bodies of water.

4.Paternoster, or Gardner loop, and these are different equipment, are the most versatile and can be used in any conditions.

5. Inline is the only rig approved for use in competitions; when used, a blind hook will not in any way harm the fish caught on the hook.

6. Installation is practically not used in fishing for bottom fish, and bream is one of them. Still, it is more often used in catching pelagic fish: sabrefish, rudd, bleak.

Advice! To save time on the pond, tie a number of rigs at home in front of the TV in a quiet environment, and when fishing, simply attach it to the rig via carabiners or loops.

Feeders

The feeder is selected by weight, as has been noted more than once above, most often depending on the strength of the current in the reservoir. Let us only add that products with a rectangular or triangular flow hold better at the bottom, but in still water you can also use round or square meshes.

To increase the casting distance, specially loaded bullet feeders are used. Their use allows you to gain an extra 10-15 meters of distance, which can sometimes become a decisive factor.

When choosing a bullet feeder, keep in mind that it should weigh more than a simple mesh, since it does not stick to the bottom as well.

Leash with hook

We will finish equipping the feeder fishing rod with leashes and hooks. Depending on the fishing conditions and the baits used, hooks of different sizes and leaders of different lengths may be required. Therefore, at home you need to impose them in various combinations.

The length of leashes for catching bream should vary from 40 centimeters to more than a meter, the thickness of the fishing line should be used from 0.10 to 0.18 millimeters. This will allow you to quickly make changes to the equipment, depending on the situation:

1. If there are no bites, we reduce the thickness of the leash, but increase the length.
2. If the fish eats the bait and no bites are visible, shorten the leash and leave the thickness unchanged.
3. If the bite is good, and large specimens come across, increase the thickness of the fishing line without changing the length.

Additional equipment

Let's briefly look at the additional equipment that will be necessary for comfortable fishing. Don't forget to take to the pond:

• a comfortable armchair or chair;
• feeder stands;
• landing net with a long handle;
• a set of spare leads and accessories;
• small tools: extractor, knife, pliers.

If you plan to fish in the dark, you will also need a flashlight, fireflies and bells.

If you are fishing with several rods, it is useful to use fireflies of different colors to immediately identify the tackle on which the bite occurred.

Lure

Even if a good place for fishing has been chosen, it is unlikely that it will be possible to collect and hold a school of bream there without bait. You can catch a large number of weighty fish only with high-quality bait, both homemade and purchased.

However, any bait, no matter who made it, must meet the following criteria:

• be fresh;
• crumbly;
• easy to wash out of the feeder under the influence of the current, but remain in the fishing zone;
• contain inclusions of large fractions;
• be well flavored.

Advice! When using commercially produced flavoring, strictly follow the recipe on its packaging. At the same time, remember the main rule: less is more! An overly strong odor can have the opposite effect and scare away the fish.

If you are fishing with bloodworms or maggots, do not forget to add some of the larvae to the bait.

Among homemade baits, the so-called Salapinskaya porridge is especially popular, the preparation of which you can see in this video:

Lures

Taking advantage of the fact that bream is practically omnivorous, it is caught using completely different baits. But starting in June, the emphasis increasingly shifts from animal baits to plant baits. The fish bites on:

• bloodworm;
• worm;
• maggot;
• caddisfly;
• dough;
• corn;
• bread;
• boilies;
• peas;
• pellets;
• pearl barley;
• steamed wheat.

In addition to the listed baits, bream is also excellently caught on various kinds of “sandwiches” - complex baits made of several elements.

Tactics and fishing techniques

The most important thing in catching any fish, and bream in particular, is finding a catching point. Therefore, when arriving at a reservoir, first of all, you should examine the bottom in order to detect some kind of bottom anomaly. After all, even on the edge there are separate pits, tubercles and other irregularities.

You can examine the bottom in several ways:

• tapping with a jig step;
• a series of several casts with fixation of the time of lowering the load to the bottom;
• dragging the load along the bottom.

Having identified a promising location, you need to fix it in direction and length. For the first parameter, we select a landmark on the opposite bank, for the second, we clip the fishing line in the spool.

Some anglers secure the line not with a clip in a clip on the spool, but with an elastic band. This makes it possible to use the entire length of the line on the reel.

The next step is starting feeding. To do this, we throw 5-10 feeders of bait mixture at the selected point. Only after this we attach the leash and start fishing.

If any questions arise during the fishing process, we resolve them promptly:

• lack of bite: change the bait or leash;
• we cut off the small things by increasing the size of the bait;
• we make the hook sweeping, but smooth, so as not to tear off the bream’s lips;
• We carry out fishing calmly, always having a landing net at hand.

Conclusion

Bream fishing in summer is exciting and rewarding. In order not to be left without a catch when you arrive at a reservoir, follow our recommendations for choosing gear, bait and lures. Also remember to choose your fishing spot carefully.

Spawning has ended, June has arrived - the bite of carp fish, including bream, has resumed. At this time, their diet changes; white breams bite on both animal and plant baits. That’s why bream fishing in summer is so varied and exciting. It is with the beginning of the warm period that the opportunity to catch bream at night arises, which adds additional adrenaline to bream anglers.

The period of active bream feeding lasts from approximately the beginning of June to mid-July, then subsides and resumes by the beginning of September, but with less intensity. Therefore, this period of bream fishing is most loved by fishermen, especially since it is pleasant to sit on the shore in the summer.

Fishing for bream in June is possible with a variety of gear, using a wide variety of groundbaits, baits and lures.

Where to look

Before you can catch any fish, you need to find it. Bream lives in almost all medium and large rivers of our country, as well as in many lakes and reservoirs.

On the river in June, the water, as a rule, subsides, and bream and bream tend to go deeper. In summer, bream fishing is carried out in pools, riverbed holes and edges. However, at night, bream rise to shallower areas of the river bed in search of food, where it is worth catching them, having identified such places in advance before dark.

In lakes, bream and bream look for food in thickets of aquatic vegetation on its borders with clean water. However, in deep reservoirs in shallow water, fish come out only at the end of daylight; at other times of the day, bream fishing in June is carried out in holes or edges.

What to catch

Bream fishing in summer is carried out using the method that is more suitable for a given reservoir and is more pleasant to the angler. It can be:

• bottom fishing rod;
• bottom fishing rod with a rubber shock absorber - elastic band;
• wire rod;
• feeder tackle;
• float fly rod, used on small lakes or when fishing from a boat;
• match tackle;
• ringing

It should be noted that on navigable rivers night stay on the water on amateur watercraft is prohibited, which excludes night fishing with a ring or a fly rod from a boat.

When to catch

Bream and bream can be caught all day long in the summer. The main thing is to find the right place. At night, bream come out of the pits into watering areas and shallow waters, so this is where you need to catch them. Morning and evening are characterized by fish migration, so the best places for fishing are edges and slopes. During the day, you need to look for bream in the deepest places, so it is advisable to use fishing methods from a boat.

How to attract

With the onset of warm weather and warming up of water, the food supply of the inhabitants of reservoirs, including bream, changes. This is reflected in the compositions and smells of bait mixtures. Spicy flavoring of baits is gradually being replaced by sweet and fruity smells; in summer they work better:

• vanilla;
• strawberry;
• cherry;
• cinnamon;
• caramel.

However, don't discount the fresh aromas of dill or anise. On some reservoirs, they are the ones that allow you to successfully catch bream.

You can use both branded bait and homemade bait. There are a huge number of recipes for bream baits, all of them can be easily found on the Internet. One of the reliable compositions, undoubtedly, is “Salapinskaya” porridge, in which the components are perfectly balanced in taste and mechanical composition, and the introduction of various aromas into it adds attractiveness to bream and bream.

What to fish with

In addition to traditional animal baits: bloodworms, maggots and worms, in the summer bream and bream happily feed on plant foods. Therefore, the following baits are asked for on the hook:

• corn;
• pearl barley;
• semolina;
• peas;
• dough;
• pasta;
• boiled potatoes;
• steamed wheat;
• wheat bread.

However, wary bream are not so easy to please, so anglers use various sandwiches as bait; one of the most catchy ones is considered to be:

1. We put a corn kernel under the skin on the hook.
2. Then we insert one star pasta through the hole. Stars are most often used by fishermen because of the ready-made hole, but in general other types of pasta can be used.
3. We secure the structure with bait of two maggots.

The amount of bait can be changed depending on the bite and size of the expected fish.

In addition to this sandwich, the usual worm + maggot pair works great. If the bite weakens, changing the number of bait elements or changing its color can help. This is well expressed in fishing with maggot bait. By changing the number of larvae and their color, you can provoke the bream to bite. However, after a while you will need to experiment again.

Bream fishing in summer will be more successful when using dips to flavor baits. There are interesting cases when fish did not bite on a live maggot larva, but took it on dough treated with a maggot attractant.

And about the weather

The best weather for fishing at any time of the year is stable. If the atmospheric pressure is constant for several days, whether it is hot or cold, the bite of the bream is guaranteed, although in warm weather the bite is better and the fisherman is more comfortable.

If weather forecasters predict a change in wind direction for the coming weekend, you can’t expect a good bite. Northern and eastern winds, which bring cold temperatures, are especially unfavorable for fishing. Such weather occurs with a sharp drop in atmospheric pressure, which fish especially do not like.

In general, nature does not have bad weather, and fish always want to eat.

Features of night summer fishing

As noted earlier, June bream fishing at night is distinguished by catchability. Therefore, let us dwell a little on considering the factors that can help at the initial stage of its development.

First you need to choose the right fishing spot. Bream does not go far from the places of its permanent deployment, so at night it feeds not far from the pool or channel edge, but in places with a clear increase in relief. An excellent point for fishing at night would be, for example, the exit from a riverbed hole.

After determining the desired fishing area, you need to decide on the choice of distance and make a preliminary feeding of the selected point.

Don’t forget about arranging your fishing spot. Everything you need should be at hand and not create interference. Stands, a table with bait, a bucket with bait, a fish tank and a landing net should be in their usual places.

It is necessary to consider lighting and signaling issues. A headlamp and chemical fireflies, which are mounted on the antennas of floats or the tips of feeder rods, will be a great help with this. Many fishermen also use sound alarms at night: bells and others.

In case of casting the tackle at a considerable distance from the shore, you need to take care of the landmark. This is especially important if the body of water is of a decent size, there are no electric poles on the opposite bank, and no one has lit a signal fire for you there. To create a fishing direction, you must carefully set it in the direction of the fishing point. For a feeder where the rod tip does not point at this point, it is necessary to set up an additional signal slingshot. The fishing distance is easily controlled by clamping the working line in the reel clip.

Bream fishing provides anglers with pleasure all year round. Fishing in July is no exception, although it has its own characteristics, without knowledge of which the fisherman will have a very difficult time.

Weather conditions in July are quite predictable. As a rule, this is heat and heat - very rarely we are pleased with summer rain and a slight cold snap. Accordingly, if you compare the fact with the weather that bream loves clean, fresh and cool water, it becomes clear that you need to look for it at depth.

🦈 Habitats

Although, there are still exceptions, but first things first. Deep places attract bream in open reservoirs; bream prefers to avoid those places where the water gets very warm in shallow water. Most large and wide rivers fall into this category.

As well as small and medium-sized rivers that do not have coastal lines of reeds or other vegetation that can create shade. In small rivers, bream tries to hide from the hot rays of the sun in pools or among algae, reeds or cattails. If there are shaded areas in shallow water you can try success there.

The bottom topography and the characteristics of the water soil can play a big role in catching bream. During the current, you need to look for fish among the sandy or clay bottom - there it rests, and goes to shallow and muddy places to feed. And since bream feeds mainly at dawn, this is considered the best time.

Therefore, in the morning and evening you need to be in shallow water, at the first rays of the sun in the shade, among reeds, cattails, in “windows” among algae. When the sun starts to get hot, you need to move to deeper places.

The angler may be upset by the fact that the bite of bream in rainy or cloudy weather in the summer practically stops, the reason for this is unknown, but it is quite rare for an angler to catch it on the hook at such a time.

🦈 Fishing gear

To catch bream in July, most anglers use a float and bottom rod. The float rod should be light and at the same time long. Its equipment should be lightweight so as not to miss the distinctive bite of bream. It is advisable to take a long and thin float. Avid fishermen of past decades probably remember homemade floats made from goose feathers.

🦈 DIY float

They are best suited for catching bream. You can make it now, if, of course, you find a good-quality goose on the market. To do this, you need to remove all the feathers from the feather, leaving only the shaft. Trim it from the thin end at a distance where the diameter of the feather approximately converges with the diameter of the other end.

Then you just need to paint the smooth part of it in variegated, clearly visible colors, wait until the paint dries and that’s it - the float is ready! With such a float, you can easily see when the bream begins to swallow the bait - the float seems to jump out of the water, and then with a splash it falls on the water and remains in this position, then you need to hook it. But you don’t need to overdo it - the bream’s lips are too soft, they can be easily torn off.

🦈 Catching bream on a donka

A bottom fishing rod is used when fishing at a distance from the shore. In this case, you will need a powerful and reliable reel, fishing line with a diameter of 0.25 mm. The load should be chosen so that it will not be carried away by the current, but there is no need to overdo it. By equipping a feeder rod with a small feeder, you can count on larger prey. The bream is attracted by the smell of bait, this will awaken its appetite, and it will not be able to refuse the bait.

🦈 Lures and lures

But you need to catch bream using the most ordinary and familiar baits and baits for every angler. First of all, this is a red dung worm, or a bunch of the same worms. Bream and bloodworms do not go unnoticed; the fish, rummaging in the mud, often feed on them, and therefore grab the bait without fear.

Maggot is a desirable bait for bream in early spring, but he is not averse to eating it in the very middle of summer. A maggot killed with boiling water can become an alternative to a live insect if the latter is avoided by the bream. It bites well on boiled pasta, but the best bait, in the opinion of most fishermen, is semolina.

🦈 Groundbait

So that the bream bite does not take long to arrive. Bream loves it very much, so the use of bait can affect fishing performance. Feel free to add flavors and attractants.

For bait, for example, you can use a basic bait mixture with the addition of pearl barley and millet; the resulting mixture should be flavored with an attractant that smells like vanilla, anise or garlic - an excellent bait for catching this fish. However, this is not the only bait option for bream - experiment, and luck will definitely smile on you!

📽 Catching bream in July video