How to tie a hanging noose step by step. Tying a loop on a fishing line. How to tie a slip loop on a fishing line

Knot "El" or "L".

Refers to tightening loops. It needs to be knitted first in the same way as the Scaffold Knot, but there is still a small touch. The knot is used to tie limbs; it is very strong. There is a noticeable advantage to this knot: after tightening the loops, you need to tie the 2 ends with a straight knot in place “C” (twist) in Figure D.

Comments: 4, Catalog: 7

Scaffold node

The name of the node indicates its purpose. This is one of the ancient knots developed by the centuries-old practice of the death penalty by hanging. However, despite its gloomy purpose, it can be successfully used for many other purposes, for example, for temporarily attaching a cable to various objects.

Sliding blind loop

Sliding eight

Based on the figure eight principle, this knot is classified as reliable, tightly tightened loops. It has the property of being tightened smoothly and evenly when pulled at the root end.

Silk knot

This knot is borrowed from the simple technique of bird catchers. Snares made from horsehair or the thinnest nylon fishing line using such a knot work flawlessly. Silk knot is considered one of the most smoothly and easily tightened Zlov.

Shackle knot

It is very similar to a “drunk” knot. Its name in English means “handcuffs”. The node can serve the same purpose. Despite the external similarity, these are two different nodes. In any case, without untying them and without removing the ends from the central loop, it is impossible to turn one knot into another. Some sailors call this knot a double masthead knot because it is sometimes used in a similar way to a masthead knot.

Tightening noose

This knot is also called the scaffold, or “hanging” knot. But despite this, it also finds other uses in maritime affairs. It is used when temporarily attaching a cable to objects floating in the water or when throwing and securing a cable to an object on the shore. This knot has an advantage even over such a good knot as a noose with half bayonets (see Fig. 65), in that the running end of the cable cannot slip out of the loop, and therefore a tightening noose is considered more reliable.

On sailing ships, this knot was used to fasten the main ends of topsail sheets, topsail sheets and other gear in cases where it was necessary to have these ends ready for release.

Running simple knot

This is the simplest knot that forms tightening noose. When pulling on the root end, the loop is tightened, but it can be increased in size by pulling the running end away from the loop. A knot can be tied in any part of the rope. With its help, you can tighten a bag, tie a bale, attach a cable to something, moor a boat to a pile.

This is the simplest knot that forms a tightening loop. When pulling on the root end, the loop is tightened, but it can be increased in size by pulling the running end to the side, away from the loop. A knot can be tied in any part of the rope. With its help, you can tighten a bag, tie a bale, attach a cable to something, moor a boat to a pile.

Based on the figure eight principle, this knot belongs to the category of reliable, tightly tightened loops. It has the property of being tightened smoothly and evenly when pulled at the root end.

A running bowline is the same arbor knot with a small loop into which the root end is passed. It is based on the lasso principle. The running bowline works flawlessly. In maritime affairs, it is used to catch floating logs and driftwood; it is used to search for and raise Admiralty anchors left at the bottom.

This knot is borrowed from the simple technique of bird catchers. Snares made from horsehair or the thinnest nylon fishing line work flawlessly with the help of such a knot. The snare knot is considered one of the smoothest and easiest knots to tighten.

Its name speaks volumes about its purpose. This is one of the ancient knots, developed by the centuries-old practice of the death penalty by hanging. However, despite its gloomy purpose, it can be successfully used for many other purposes. For example, for temporarily attaching a cable to various objects.

This knot is also called a scaffold or "gallows" knot. But despite this, it also finds other uses in maritime affairs. It is used when temporarily attaching a cable to objects floating in the water or when throwing and securing a cable to an object on the shore. This knot has an advantage even over such a good knot as a noose with half bayonets, in that the running end of the cable cannot slip out of the loop, and therefore a tightening noose is considered more reliable. On sailing ships, this knot was used to fasten the main ends of topsail sheets, topsail sheets and other gear in cases where it was necessary to have these ends ready for release. To tie this knot, the cable is laid in the form of two loops of equal size. Both loops are surrounded several times with the running end of the cable, after which this end is passed into the loop facing the root part of the cable and, pulling out the outer loop, is clamped in it. A tightening noose can always be easily untied by pulling the main part of the cable. This gloomy knot can be well used in maritime affairs in two ways. Firstly, according to its knitting pattern, it is convenient to store the cable in the form of a compact coil. By making this knot without a loop on the running end of the throwing end, you get excellent heaviness. If you find it not heavy enough, dip it in water before use.

Also called an Angler's loop, the Angler's loop forms a strong, non-slip and immovable loop in any position along most types of lines, including strike line.

History of the Loop node

Considered the simplest among various other knots, the loop dates back a very long time. It is believed that the noose was invented back in the 1st century AD. e., which can be read in the monograph of the Greek physician Heracles. First, a regular loop appeared, then various modifications and complications began to be invented. A perfect loop appeared, a blind one, and then an oak one and many others.

What is the Loop knot used for?

The perfect loop is a seafaring and fishing knot. Typically, the knot and its modifications are used to create a loop that will not tighten at the end of a cable, rope or rope.

Many areas of human activity use the excellent qualities of the loop. For example, marine vessels, agriculture, industry and even in everyday life. But basically, as mentioned above, the loop is used by sailors and fishermen for various purposes. Boaters can use the knot to tie a tug, and fishermen can use it for anything, such as tying hooks to line or leader, tying main line and leader, tying up a boat, and much more.

What does a Loop knot look like?

This strong loop has a standing end extending out of the line in a straight line. The perfect loop, as referred to in Ashley's book of knots, is one of the simplest fly fishing knots to create a small loop at the end of a rope or line. It is also used to connect small baits and hooks.

At first glance, the perfect loop looks very simple, so you will immediately understand how to knit it. All modifications are not particularly different from each other.

Although the perfect loop can be tied as easily as the Bowline knot, it has higher efficiency in any use.

Advantages and disadvantages of the Loop knot

There are many more advantages in this list than disadvantages, which is immediately clear. The loop is probably one of the top 10 knots of every fisherman who often faces the need to tie something.

Pros of the Loop Knot

• looks thin even when pulled tight;
• durable in both fresh and salt water;
• allows you to conveniently and quickly change the main loop and connection loop;
• easily tied by hand;
• the size can be adjusted to make a microloop;
• one of the few knots that holds a banjo cord well;
• reliable on any ropes, even slippery ones;
• can be tied with one hand;
• can be additionally tightened for good stability;
• can be quickly tied up in case of danger;
• possibility of knitting through a ring.

Flaws

• does not tighten well;
• not suitable for situations where the knot needs to be untied later.

How to tie a Loop Knot?

The following step-by-step instructions with pictures will help you figure out how to tie a knot.

1.Choose a good rope for practicing knot tying. It should not be too slippery, although in this case any will do.

2.Form a loop as shown in the picture.

3.Form a second loop and place it on top of the first.

4.Place the end of the rope between the 2 loops.

5.Pass the top loop through the bottom loop.

6.Lubricate the rope and tighten by pulling on the standing end and a new loop.

7.Cut the end and the knot is ready.

So you have learned how to knit one of the most effective and most used fishing knots. A perfect loop will help you out in any situation, because it has many advantages that outweigh minor disadvantages. Now all your gear and hooks will be securely connected, thanks to such a wonderful knot as the perfect loop or fishing loop.

Don't forget that in the end you will have to put in a lot of effort to untie the loop knot. However, this is not a problem, especially for a fisherman who attaches hooks to a fishing line for a regular rod, spinning rod or bottom tackle. Hurry up and go fishing to put your theoretical knowledge into practice!

Fishing has become for many people not only a way of relaxation, but also a sport, so the question of how to make a loop on a fishing line is relevant. To bring home a quality catch, using certain types of loops and knots is a must. The main criterion for a loop on a fishing line is not its versatility, but the parameter of the possible load that it can withstand, so the question of how to tie a loop is very relevant.

As a rule, the fishing line loop largely determines the outcome of the fishing and the amount of prey caught. To perform the operation quickly and efficiently, you will have to train hard. Often fishermen are interested in the question of how to make a loop on a fishing line.

To save time, you can use the following instructions:

1. For double fishing line, make a medium-sized loop.
2. We fix the crochet hook from below, passing it through the loop and hooking the smaller part.
3. We bring the small loop through the larger part and remove it from the hook.
4. We repeat the last two steps to tie the knot.

If the operation was done correctly, visually the loop should look like an infinity sign or an ordinary figure eight. Be sure to tighten it before use. The fishing line is pre-wetted. To do this, you can take ordinary saliva. This must be done so that in the future the fishing line does not fray and can last as long as possible.

The most popular fishing line loop is the perfect loop, also called the no-tight loop. An alternative name is “loop-to-loop connection.”

To make a non-tightening loop, you need to do the following:

• The first loop should be attached to the main line. This is a simple procedure that does not cause complications;
• the second loop should be knitted on the basis of the already prepared first part.

As a rule, only a few succeed in making high-quality non-tightening loops the first time, so many fishermen spend several dozen attempts to get the equipment right.

The second loop should be held in the place where the tap will be fixed in the future. With the other hand, take the loop from the reverse side and make a small curl. In order for the surgical loop to last as long as possible, it is recommended to make at least 6 turns. The result should be a structure of at least medium size.

Fold the resulting loop in half and repeat the operation. The result is a non-tightening side release loop that is equally popular among professional fishermen.

To tighten the leash loop, we use the standard rule - the fishing line should never be dry.

Self-tightening loop

There are many self-tightening loops that are actively used for various baits. As a rule, they are actively used for fishing using wobblers, hooks and carbines. However, such a surgical loop is not suitable for soft structures: fishing lines or soft cords. The most common are Clinch and arbor Knot. Most professional fishermen use this loop because of the ability to loosen or tighten the loop as the main line remains slid inside it. The running knot is a trivial example of how to make a self-tightening loop.

To knit, you need to follow the pattern:

1. Using a cross, a loop is formed on the fishing line.
2. At the base of the loop we thread the main line. In the initial position, it should occupy a position on top.
3. Tie the loop slowly and carefully, but do not tighten the knot. Visually, you should get something like a knot, where part of the main fishing line is located inside.
4. Before tying, the fishing line must be wetted.

The running knot is not recommended for use in critical areas. It is better to use it where there are no fastenings or where fishing gear is not located nearby. If a slip knot is needed in a critical area, then it is best to clarify how to knit a Clinch.

The basic rule and recommendation for those fishermen who want to keep the fishing line safe is the mandatory wetting before tying it. This way it does not break and becomes more elastic. Maximum strength is also achieved with minimal line overheating. This can be achieved by tightening slowly.

When tying knots on the main line, you need to make sure that they are not the same. Towards the middle of the line they become larger, and towards the end they become smaller. If you decide on the question of how to tie a loop or how to tie a fishing line, then in the future you can only change the bait or leash. In some cases, depending on the situation, a knot at the end of the line is necessary.

If monofilament is used, it is not recommended to additionally glue it, since their endurance is sharply reduced. The structure becomes more fragile.

If absolutely necessary, you should use only special glue that increases ductility. The knot must be strong, otherwise the structure will fall apart during fishing.

Depending on how the knot and loop are tied correctly, we can talk about the possible amount of catch and the quality of the process itself. After all, prepared equipment always facilitates the process and minimizes the preparation time in nature, when the peak of the bite begins.

Application: A regular noose is identical in structure to a slip knot except that the open loop is formed from the long end rather than the short one. It is used as a trap to catch animals. But this is not a hanging noose.

Tying a simple noose

This is a frequently tied knot - it is used when tying the Arbor knot, as well as during knitting when casting on loops, at this moment we often tie a noose knot, but this knot is called a slip knot. The garrote has many other uses, such as a bandage when packing a package.

Tying a noose(Noose knot)

1. Make a loop at the end of the rope.
2. Pass the open loop of the root end through the starting loop.
3. Make the open loop larger and drape it over the item.
4. Tighten the loop by pulling the root end.

It is very similar to a regular noose, except for the larger number of turns around the loop; the turns were made for humane reasons; they contributed to the fracture of the cervical vertebrae, which caused quick death. The Scaffold Loop is not illustrated in detail here.

The concept of "noose" is used for different purposes. This name describes the knot on this page, a term for loop knots that are pulled tight by weight and is sometimes called a Scaffold Loop by this name.

What's worse is that Duncan and Scaffold Loop are often mistakenly considered to be one and the same. You can make your life easier by using the term "noose" only for this node and using proper names for, for example, "Running Bowline" or "UNI (Duncan) Knot", and similar "noose" nodes.

How to tie it: The open loop of the long end of the rope is pushed through the loop. The same result can be achieved by running the end of a rope around an object and using the short end to tie a half bayonet around the long end. This is how the first part of one of the versions is formed